Airtac MICJ Adjustable Mini Cylinder MICJ16X175-75S
The AirTAC MICJ Adjustable Mini Cylinder MICJ16X175-75S is a genuine double acting, double rod, adjustable stroke + cushion round-body mini air cylinder with a Ø16mm bore and 175mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ16 mm
- Stroke175 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke + cushion
- Rod threadM6×1.0
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ16X175-75S
Trim the forward stop by up to 75 mm on site without swapping hardware using the AirTAC MICJ16X175-75S. This stainless-steel, round-body mini cylinder pairs that external extend adjuster with a variable air cushion at both ends, letting you dial in the exact position while soaking up high-speed shock.
The -S suffix adds a piston magnet for CMSG, DMSG, or EMSG sensors, and the M5×0.8 port keeps airflow compact.
Airtac MICJ Adjustable Mini Cylinder MICJ16X175-75S Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ16X175-75S |
|---|---|
| Series | MICJ ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 175 mm |
| Acting type | Double acting, double rod, adjustable stroke + cushion |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ16X175-75S
| MICJ | ISO 6432 round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 16 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -75 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ16X175-75S Is Used
Light Part Ejection
Eject small plastic parts from a mold at speed, using the 75 mm extend trim to hit the exact drop point while the air cushion absorbs the impact of the 5.1 kg moving mass.
Sensor Positioning
Deploy a CMSG or DMSG sensor-equipped probe against delicate electronics, tuning the extend end precisely to avoid crushing components while benefiting from washdown-ready stainless construction.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ16X175-75S the Right Cylinder?
For lighter tasks, the MIJ bumper-only series is the next step down, as the MICJ line starts at this Ø16 size. This model shines in fast set-position moves where the 75 mm extend trim and needle cushions prevent end-of-stroke banging.
Remember that the stop screw sets the end position but is not a mid-stroke lock; the piston will drift on air loss, so add an external rod lock or pilot check valve to hold a suspended load. Mount via LB foot, FA flange, or TC trunnion (SDB is not offered on this adjustable variant), and use the built-in magnet for solid sensor feedback.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ16X175-75S FAQ
This double-acting cylinder pushes at 100.5 N and pulls at 86.4 N at 0.5 MPa. At 0.7 MPa, push is 140.7 N and pull is 120.9 N. The theoretical maximum force is 20.5 kgf at 1.0 MPa, and it uses an M5×0.8 air port.
An external stop screw shortens the extend stroke by up to 75 mm on site, while a needle valve adjusts the air cushion at both ends to decelerate the piston before impact. The -S denotes a built-in magnet for CMSG, DMSG, or EMSG position sensors. Note that the cushion only decelerates; it does not lock the load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ16X175-75S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.