Airtac MICJ Adjustable Mini Cylinder MICJ16X200-10
The AirTAC MICJ Adjustable Mini Cylinder MICJ16X200-10 is a genuine double acting, double rod, adjustable stroke + cushion round-body mini air cylinder with a Ø16mm bore and 200mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ16 mm
- Stroke200 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke + cushion
- Rod threadM6×1.0
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ16X200-10
Trim the forward stop by up to 10 mm on site without swapping hardware: this MICJ16X200-10 delivers a 190-200 mm extend window alongside a needle-set air cushion at both ends to soak up high-speed shock. The double-acting stainless round barrel and Ø6 mm rod shrug off mild washdown while conforming to the ISO 6432 mini mounting interface.
This non-magnet SKU cannot host a sensor; add an -S variant for CMSG/DMSG/EMSG switches. Air ports are M5×0.8.
Airtac MICJ Adjustable Mini Cylinder MICJ16X200-10 Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ16X200-10 |
|---|---|
| Series | MICJ ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 200 mm |
| Acting type | Double acting, double rod, adjustable stroke + cushion |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ16X200-10
| MICJ | ISO 6432 round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 16 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ16X200-10 Is Used
Diverter Gate Stroke Trim
Fine-tune the 10 mm extend stop on a high-speed diverter to hit the exact lane gap without bending brackets, while the dual air cushions absorb the shock of the 100.5 N impact.
Light Carton Flap Folding
Fold light packaging flaps at speed; the stainless build handles mild washdown, and the adjustable forward stop dials in the perfect crease depth for a 5.1 kg load margin.
Small Part Ejection
Eject lightweight plastic parts from a mold cavity, tuning the 190-200 mm extend endpoint on the fly to clear varying tooling heights without crashing.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ16X200-10 the Right Cylinder?
The 10 mm extend trim plus dual cushions shine on fast set-position moves, but remember the stop screw only sets the end position—it is not a mid-stroke lock. For holding a suspended load on air loss, fit an external rod lock or pilot check valve.
Mount via LB foot, FA flange or TC trunnion (SDB pivot-block is not offered on this adjustable version). Use standard ISO 6432 brackets for the Ø16 body.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ16X200-10 FAQ
It uses an M5×0.8 air port. At 0.5 MPa it pushes 100.5 N and pulls 86.4 N. At 0.7 MPa it pushes 140.7 N and pulls 120.9 N. The theoretical maximum force is 20.5 kgf at 1.0 MPa.
An external screw shortens the extend stroke by up to 10 mm (retract remains full), and a needle valve adjusts the air cushion at both ends to decelerate the piston near stroke end. This cylinder does not hold position on air loss—the piston drifts—and the stop screw is an end-position setter, not a mid-stroke lock. This non-S SKU lacks a magnet, so it cannot take sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ16X200-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.