Airtac MICJ Adjustable Mini Cylinder MICJ16X200-100
The AirTAC MICJ Adjustable Mini Cylinder MICJ16X200-100 is a genuine double acting, double rod, adjustable stroke + cushion round-body mini air cylinder with a Ø16mm bore and 200mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ16 mm
- Stroke200 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke + cushion
- Rod threadM6×1.0
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ16X200-100
Dial in a precise forward stop on-site with the AirTAC MICJ16X200-100, a stainless-steel round-body mini cylinder that shortens the extend stroke by up to 100 mm via an external screw. The usable extend range spans 100 to 200 mm, while retract remains full.
Built with a riveted stainless barrel and rod for mild washdown resistance, it conforms to the ISO 6432 mounting interface for straightforward bracket drops. Note this SKU lacks a magnet, so it cannot host CMSG/DMSG/EMSG sensors; the M5×0.8 port and M6x1.0 rod thread match the standard 16 mm bore architecture.
Airtac MICJ Adjustable Mini Cylinder MICJ16X200-100 Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ16X200-100 |
|---|---|
| Series | MICJ ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 200 mm |
| Acting type | Double acting, double rod, adjustable stroke + cushion |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ16X200-100
| MICJ | ISO 6432 round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 16 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -100 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ16X200-100 Is Used
High-Speed Diverting
Use the dual air cushions to silently absorb shock during rapid 30-800 mm/s diverting strokes on a compact ISO 6432 interface.
Light Part Ejection
Eject small plastic parts weighing under 5 kg, tweaking the extend end screw on-site to match varying box depths without replacing the actuator.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ16X200-100 the Right Cylinder?
Choose this 100 mm adjustable model when you need fast set-position moves and want to trim the extend end without swapping cylinders. The needle cushion handles end-of-stroke deceleration, but remember it is not a mid-stroke lock; the piston drifts on air loss, so fit an external rod lock or pilot check valve for held loads. Mount via LB, FA, or TC (SDB is unavailable here), and select an -S variant if you need position sensing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ16X200-100 FAQ
This double-acting cylinder pushes 100.5 N and pulls 86.4 N at 0.5 MPa, and pushes 140.7 N while pulling 120.9 N at 0.7 MPa. Its theoretical maximum force is 20.5 kgf at 1.0 MPa, and it features an M5×0.8 air port.
An external screw shortens the extend end position by up to 100 mm (usable extend 100-200 mm), while the needle-set air cushion at both ends decelerates the piston near stroke end to absorb shock. This cylinder does not hold position on air loss and the cushion is not a brake; for load holding you need an external rod lock. This non-S SKU lacks a magnet for CMSG/DMSG/EMSG sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ16X200-100
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.