Airtac MICJ Adjustable Mini Cylinder MICJ16X200-100S
The AirTAC MICJ Adjustable Mini Cylinder MICJ16X200-100S is a genuine double acting, double rod, adjustable stroke + cushion round-body mini air cylinder with a Ø16mm bore and 200mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ16 mm
- Stroke200 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke + cushion
- Rod threadM6×1.0
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ16X200-100S
Trim the forward stop by up to 100 mm right at the machine without swapping cylinders. The AirTAC MICJ16X200-100S is a double-acting, round-body stainless-steel mini cylinder that pairs this on-site extend-stroke adjustment with a needle-set air cushion at both ends to soak up high-speed shock.
Built to the ISO 6432 mounting interface, this Ø16 bore drops into standard mini brackets and uses an M5×0.8 port with an M6x1.0 male rod thread. The -S suffix means a piston magnet is installed for CMSG, DMSG, or EMSG sensors.
Airtac MICJ Adjustable Mini Cylinder MICJ16X200-100S Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ16X200-100S |
|---|---|
| Series | MICJ ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 200 mm |
| Acting type | Double acting, double rod, adjustable stroke + cushion |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ16X200-100S
| MICJ | ISO 6432 round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 16 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -100 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ16X200-100S Is Used
Variable Length Ejection
Dial in the exact part ejection distance up to 100 mm on the fly, using the dual air cushions to silently absorb the impact of high-speed 60 N working load movements.
Adjustable Stop Forming
Set the precise forward pressing position for light 5.1 kg assembly tasks while relying on the stainless construction to resist mild washdown corrosion.
Dynamic Diverting
Fine-tune the diverting arm reach on a packaging line, letting the adjustable end cushions decelerate the 200 mm stroke smoothly without needing custom spacers.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ16X200-100S the Right Cylinder?
For lighter duty, the smaller MIJ series relies on a bumper rather than an air cushion, making this MICJ the smallest bore with true adjustable shock absorption. If you need more force, stepping up to the Ø20 bore raises the 0.5 MPa push force to 157 N. The external screw sets the extend end position only (usable forward travel 100-200 mm), but it is not a mid-stroke lock; the piston will drift on air loss, so add an external rod lock or pilot check valve to hold a suspended load. Choose LB, FA, or TC mounts (SDB is not offered here), and select your CMSG/DMSG/EMSG switches to pair with the built-in magnet.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ16X200-100S FAQ
This Ø16 bore cylinder features an M5×0.8 port and an M6x1.0 male rod thread.
An external stop screw shortens the extend stroke by up to 100 mm on-site, while the needle-set air cushions at both ends only decelerate the piston near the end of travel (they do not lock the load). The -S suffix indicates a built-in piston magnet for CMSG, DMSG, or EMSG position sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ16X200-100S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.