Airtac MICJ Adjustable Mini Cylinder MICJ16X200-20
The AirTAC MICJ Adjustable Mini Cylinder MICJ16X200-20 is a genuine double acting, double rod, adjustable stroke + cushion round-body mini air cylinder with a Ø16mm bore and 200mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ16 mm
- Stroke200 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke + cushion
- Rod threadM6×1.0
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ16X200-20
Trim the forward stop by up to 20 mm on site with the MICJ16X200-20, a stainless-steel round-body mini cylinder that pairs an adjustable extend stroke with a needle-set air cushion at both ends to absorb high-speed shock. The external screw lets you dial in the exact 180-200 mm extend position without swapping hardware, while the retract stroke remains full. Built with a 16 mm bore and 6 mm rod, it uses an M5×0.8 port and conforms to the ISO 6432 mounting interface for standard mini brackets.
The stainless barrel and rod resist mild corrosion and washdown environments. Note that this specific SKU lacks a magnet and cannot host CMSG, DMSG, or EMSG sensors; order the -S variant if position sensing is required.
Airtac MICJ Adjustable Mini Cylinder MICJ16X200-20 Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ16X200-20 |
|---|---|
| Series | MICJ ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 200 mm |
| Acting type | Double acting, double rod, adjustable stroke + cushion |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ16X200-20
| MICJ | ISO 6432 round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 16 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -20 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ16X200-20 Is Used
Light Parts Ejector
Shoots small plastic parts out of a mold cavity, using the 20 mm extend adjustment to hit the exact drop distance without reprogramming the machine.
Package Divert Stroke
Pushes light cartons on a sorting line, relying on the adjustable air cushion to decelerate the 200 mm stroke smoothly at high cycling speeds.
Component Press Fit
Seats small electronic connectors into housings, applying up to 60 N of safe working force while trimming the forward stop to prevent crushing.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ16X200-20 the Right Cylinder?
The adjustable 20 mm extend stop and dual air cushions shine in fast set-position moves where you must tune the impact deceleration on the fly. Mount via LB foot, FA flange, or TC trunnion (the SDB pivot-block is not offered on this adjustable variant).
Remember that the stop screw sets the end position but does not function as a mid-stroke lock. The cylinder will drift and cannot hold a load on air loss or when the valve is centered; integrate an external rod lock or pilot-operated check valve if you need strict position holding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ16X200-20 FAQ
At 0.7 MPa, push is 140.7 N and pull is 120.9 N. The theoretical maximum force is 20.5 kgf at 1.0 MPa.
An external screw shortens the extend stroke by up to 20 mm (usable range 180-200 mm), while a needle valve adjusts the air cushion at both ends to soak up high-speed shock. The cushion only decelerates near the stroke end and does not lock the piston. This SKU has no magnet and cannot take sensors; the -S version is required for CMSG/DMSG/EMSG switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ16X200-20
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.