Airtac MICJ Adjustable Mini Cylinder MICJ16X200-20S
The AirTAC MICJ Adjustable Mini Cylinder MICJ16X200-20S is a genuine double acting, double rod, adjustable stroke + cushion round-body mini air cylinder with a Ø16mm bore and 200mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ16 mm
- Stroke200 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke + cushion
- Rod threadM6×1.0
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ16X200-20S
Dial in a precise forward stop on-site with the AirTAC MICJ16X200-20S, a stainless-steel round-body mini cylinder that lets you shorten the extend stroke by up to 20 mm via an external screw. The usable extend range is 180-200 mm, while retract remains full. An adjustable air cushion at both ends soaks up high-speed shock, letting you set the position and control the impact. It uses the ISO 6432 mounting interface for standard mini brackets.
The built-in magnet (-S) supports CMSG, DMSG, and EMSG sensors. The M5×0.8 port and M6x1.0 male rod thread simplify integration.
Airtac MICJ Adjustable Mini Cylinder MICJ16X200-20S Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ16X200-20S |
|---|---|
| Series | MICJ ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 200 mm |
| Acting type | Double acting, double rod, adjustable stroke + cushion |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ16X200-20S
| MICJ | ISO 6432 round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 16 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -20 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ16X200-20S Is Used
Sorting Diverter
Pushes light packages at speed, using the 20 mm extend trim to dial in the exact divert angle without swapping cylinders, while the dual air cushions absorb end-of-stroke impact.
Small Part Ejection
Ejects lightweight plastic parts from a mold cavity, using the adjustable forward stop to tune the ejection distance precisely within the 180-200 mm range.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ16X200-20S the Right Cylinder?
For lighter duties, the MIJ bumper-only series lacks this air cushion, making the MICJ16 the smallest bore to combine an adjustable stop with shock absorption. If you need more force, stepping up to the Ø20 bore raises the 0.5 MPa push force to 157 N.
The external stop screw sets the extend end position but is not a mid-stroke lock; the piston will drift on air loss, so add an external rod lock or pilot check valve to hold a suspended load. Mount via LB foot, FA flange, or TC trunnion (SDB pivot-block is unavailable on this adjustable variant). Choose CMSG, DMSG, or EMSG switches to leverage the -S magnet.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ16X200-20S FAQ
The theoretical maximum force is 20.5 kgf at 1.0 MPa.
An external screw shortens the extend stroke by up to 20 mm (usable range 180-200 mm), while needle-set air cushions at both ends decelerate the piston near stroke ends. The cushion only decelerates and is not a brake; the piston drifts on air loss, so use an external rod lock for holding. The -S magnet enables CMSG/DMSG/EMSG sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ16X200-20S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.