Airtac MICJ Adjustable Mini Cylinder MICJ16X200-40S
The AirTAC MICJ Adjustable Mini Cylinder MICJ16X200-40S is a genuine double acting, double rod, adjustable stroke + cushion round-body mini air cylinder with a Ø16mm bore and 200mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ16 mm
- Stroke200 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke + cushion
- Rod threadM6×1.0
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ16X200-40S
Dial in a precise forward stop on-site with the AirTAC MICJ16X200-40S, a stainless-steel round-body mini cylinder featuring a 40 mm adjustable extend stroke. An external screw trims the extend end position down from the 200 mm nominal stroke, while a needle-set adjustable air cushion at both ends absorbs high-speed shock. This double-acting actuator uses the ISO 6432 mounting interface for easy bracket drops.
The stainless barrel and piston rod resist mild corrosion and washdown environments. Equipped with a built-in magnet (-S), it supports CMSG, DMSG, and EMSG sensors.
Airtac MICJ Adjustable Mini Cylinder MICJ16X200-40S Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ16X200-40S |
|---|---|
| Series | MICJ ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 200 mm |
| Acting type | Double acting, double rod, adjustable stroke + cushion |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ16X200-40S
| MICJ | ISO 6432 round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 16 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -40 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ16X200-40S Is Used
Light-Part Ejection
Tunes the 40 mm extend stop to eject 5 kg parts precisely off a conveyor, relying on the dual air cushions to prevent endcap bounce at high speed.
Film Roll Tensioning
Feeds packaging material with a safe 60 N working load, dialing in the exact 160-200 mm forward reach to maintain tension without overstressing the web.
Lab Dispense Head
Positions a fluid dispense nozzle in a washdown-resistant stainless build, using the CMSG sensor to confirm the extend position before cycling.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ16X200-40S the Right Cylinder?
When sizing this 16 mm bore unit, the smaller MIJ series offers only a bumper without adjustable air cushions, making this model the entry point for combined stroke and cushion control. The 40 mm extend adjuster is ideal for fast, settable-position moves where you need to tune the forward stop without machining spacers.
Note that the stop screw sets the end position but is not a mid-stroke lock; the piston will drift on air loss, so use an external rod lock or pilot check valve to hold a suspended load. For mounting, use LB, FA, or TC attachments, as the SDB pivot block is not available on this adjustable variant. The included -S magnet enables position sensing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ16X200-40S FAQ
This 16 mm bore cylinder features an M5×0.8 port and an M6x1.0 male rod thread.
An external screw shortens the extend stroke by up to 40 mm on-site, giving a usable 160-200 mm forward range without changing the cylinder. Needle valves adjust the air cushion at both ends to decelerate the piston before impact. The -S magnet enables CMSG, DMSG, and EMSG sensors for position feedback.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ16X200-40S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.