Airtac MICJ Adjustable Mini Cylinder MICJ16X200-50
The AirTAC MICJ Adjustable Mini Cylinder MICJ16X200-50 is a genuine double acting, double rod, adjustable stroke + cushion round-body mini air cylinder with a Ø16mm bore and 200mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ16 mm
- Stroke200 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke + cushion
- Rod threadM6×1.0
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ16X200-50
Trim the forward stop on site without swapping hardware using this AirTAC MICJ16X200-50 mini cylinder. An external stop screw shortens the extend end by up to 50 mm, yielding a usable forward range of 150-200 mm, while a needle-set adjustable air cushion at both ends soaks up high-speed shock.
Built as a double-acting, round-body stainless-steel unit, it conforms to the ISO 6432 mounting interface for straightforward bracket drops. It uses an M5×0.8 port and an M6x1.0 male rod thread. Note this SKU lacks a magnet, so it cannot host CMSG/DMSG/EMSG sensors.
Airtac MICJ Adjustable Mini Cylinder MICJ16X200-50 Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ16X200-50 |
|---|---|
| Series | MICJ ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 200 mm |
| Acting type | Double acting, double rod, adjustable stroke + cushion |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ16X200-50
| MICJ | ISO 6432 round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 16 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -50 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ16X200-50 Is Used
Light-Part Ejection
Dial in a 180 mm extend stop to push 5 kg molded parts out of a press consistently, relying on the adjustable air cushion to absorb the high-speed impact.
Package Diverting
Tune the forward stroke by 20 mm on the fly to deflect small cartons on a conveyor without re-engineering the mounting brackets.
Lab Sample Routing
Use the stainless round-body construction and precise 150-200 mm extend window to route lightweight sample trays in washdown test cells.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ16X200-50 the Right Cylinder?
This MICJ16X200-50 shines in fast set-position moves where you need to dial in the extend stop and tune the end-of-stroke impact.
The stop screw sets the end position but is not a mid-stroke lock; the piston will drift on air loss, so deploy an external rod lock or pilot check valve for held loads. Mount via LB foot, FA flange, or TC trunnion (SDB pivot-block is unavailable on this adjustable variant), and select the -S magnet version if position sensing is required.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ16X200-50 FAQ
This Ø16 mm bore cylinder uses an M5×0.8 port and an M6x1.0 male rod thread.
An external screw shortens the extend stroke by up to 50 mm (usable range 150-200 mm), and a needle valve adjusts the air cushion at both ends to decelerate the piston. The cushion only absorbs shock near stroke end and does not lock the piston; the cylinder drifts on air loss, and this non-S SKU cannot host sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ16X200-50
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.