Airtac MICJ Adjustable Mini Cylinder MICJ16X225-10S
The AirTAC MICJ Adjustable Mini Cylinder MICJ16X225-10S is a genuine double acting, double rod, adjustable stroke + cushion round-body mini air cylinder with a Ø16mm bore and 225mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ16 mm
- Stroke225 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke + cushion
- Rod threadM6×1.0
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ16X225-10S
Trim the forward stop by up to 10 mm on site without swapping hardware using this AirTAC MICJ16X225-10S round-body mini cylinder. The external screw adjusts the extend end position down to a 215 mm usable stroke, while a needle-set variable air cushion at both ends soaks up high-speed shock. It is a double-acting stainless-steel unit with a built-in magnet (-S) for position sensing.
It uses the ISO 6432 mounting interface and the stainless barrel resists mild washdown corrosion.
Airtac MICJ Adjustable Mini Cylinder MICJ16X225-10S Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ16X225-10S |
|---|---|
| Series | MICJ ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 225 mm |
| Acting type | Double acting, double rod, adjustable stroke + cushion |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ16X225-10S
| MICJ | ISO 6432 round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 16 | Bore size in mm. |
| ×225 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ16X225-10S Is Used
Diverter Gate
Shift a lightweight conveyor gate at speed; the adjustable air cushion absorbs the shock of the 5.1 kg moving mass at the end of travel.
Carton Stopper
Halt small cartons precisely using the on-site extend adjustment, letting the stainless body withstand mildly humid packing environments.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ16X225-10S the Right Cylinder?
For lighter duty, the MIJ bumper-only series lacks this air cushion; for heavier moves, the Ø20 bore pushes 157.0 N at 0.5 MPa. Choose this Ø16 when you need fast set-position moves under 60 N and want to dial in the exact 215-225 mm extend stop. The SDB pivot-block is not offered on this adjustable variant—use LB, FA, or TC mounts, plus CA, U, R, or CM back covers.
The -S magnet enables CMSG, DMSG, or EMSG switches for end-of-stroke confirmation. Remember that the stop screw sets the end position but is not a mid-stroke lock; the cylinder will drift on air loss, so add an external rod lock or pilot check valve to hold a suspended load.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ16X225-10S FAQ
The air port is M5×0.8.
The external screw shortens the extend stroke by up to 10 mm (retract stays full), and the needle-set air cushion decelerates the piston at both ends. The -S magnet allows CMSG/DMSG/EMSG sensors. It does not hold position on air loss, so use a pilot check valve for suspended loads.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ16X225-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.