Airtac MICJ Adjustable Mini Cylinder MICJ16X25-10
The AirTAC MICJ Adjustable Mini Cylinder MICJ16X25-10 is a genuine double acting, double rod, adjustable stroke + cushion round-body mini air cylinder with a Ø16mm bore and 25mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ16 mm
- Stroke25 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke + cushion
- Rod threadM6×1.0
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ16X25-10
Trim the forward stop by up to 10 mm on site without swapping cylinders, and let the adjustable air cushion at both ends soak up high-speed shock. The AirTAC MICJ16X25-10 is a double-acting, round-body stainless-steel mini cylinder that lets you set the extend position and control the impact in one compact unit.
Built with a stainless barrel and rod for mild washdown resistance, this Ø16 bore drops into standard ISO 6432 mini-cylinder brackets. It uses an M5×0.8 port and an M6x1.0 male rod thread. Note this SKU lacks a magnet, so it cannot take CMSG/DMSG/EMSG sensors.
Airtac MICJ Adjustable Mini Cylinder MICJ16X25-10 Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ16X25-10 |
|---|---|
| Series | MICJ ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 25 mm |
| Acting type | Double acting, double rod, adjustable stroke + cushion |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ16X25-10
| MICJ | ISO 6432 round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 16 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ16X25-10 Is Used
Carton Flap Folding
Set a precise forward stop for folding light cardboard flaps at high speed, letting the needle cushion absorb the impact without crushing the material.
Lab Sample Sorting
Use the stainless round body in mildly humid lab environments to push sample vials into a lane, adjusting the extend position on site to match different rack depths.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ16X25-10 the Right Cylinder?
For lighter duty, the MIJ bumper-only series is the next step down, as the cushioned MICJ line starts at Ø16. The 10 mm extend adjuster and needle-set cushion shine in fast set-position moves where you must dial in the exact forward stop and decelerate smoothly.
This cylinder does not hold position on air loss; the piston drifts, and the cushion only decelerates near the stroke end, so add an external rod lock or pilot check valve for held loads. Mount it via LB foot, FA flange, or TC trunnion (SDB pivot-block is not available on this adjustable variant).
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ16X25-10 FAQ
The theoretical max force is 20.5 kgf at 1.0 MPa. This Ø16 bore uses an M5×0.8 air port.
An external screw shortens the extend stroke by up to 10 mm, while the needle-set air cushion at both ends decelerates the piston at high speed. The cushion only slows the stroke near the end and does not lock or hold the load on air loss. This SKU has no magnet and cannot take sensors; the -S variant adds a magnet for CMSG/DMSG/EMSG switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ16X25-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.