Airtac MICJ Adjustable Mini Cylinder MICJ16X25-20
The AirTAC MICJ Adjustable Mini Cylinder MICJ16X25-20 is a genuine double acting, double rod, adjustable stroke + cushion round-body mini air cylinder with a Ø16mm bore and 25mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ16 mm
- Stroke25 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke + cushion
- Rod threadM6×1.0
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ16X25-20
Trim the forward stop by up to 20 mm on site without swapping cylinders using the AirTAC MICJ16X25-20. This double-acting, round-body stainless-steel mini cylinder pairs that adjustable extend stroke with a needle-set air cushion at both ends, letting you dial in the exact forward position while soaking up high-speed shock.
Built to the ISO 6432 mounting interface for Ø16, it pushes 100.5 N and pulls 86.4 N at 0.5 MPa through an M5×0.8 port. The stainless barrel and rod resist mild washdown corrosion. This SKU lacks the -S magnet, so it cannot take CMSG/DMSG/EMSG sensors.
Airtac MICJ Adjustable Mini Cylinder MICJ16X25-20 Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ16X25-20 |
|---|---|
| Series | MICJ ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 25 mm |
| Acting type | Double acting, double rod, adjustable stroke + cushion |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ16X25-20
| MICJ | ISO 6432 round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 16 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| -20 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ16X25-20 Is Used
Light Carton Flap Control
Set a repeatable forward stop for folding light packaging flaps, using the adjustable air cushion to absorb impact at the end of the 25 mm travel.
Small Part Ejection
Eject lightweight plastic or aluminum components from a fixture, fine-tuning the extend position on site without changing the cylinder mounting.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ16X25-20 the Right Cylinder?
For lighter duty, the standard MIJ bumper cylinder drops the cushion, while stepping up to the Ø20 MICJ raises the 0.5 MPa push force to 157 N. Choose this Ø16 model when you need fast set-position moves under 60 N. The external screw shortens the extend end only; it sets the end position but is not a mid-stroke lock. If air loss occurs, the piston drifts—use an external rod lock or pilot check valve to hold a load. Mount via LB, FA, or TC (SDB is not offered on this adjustable variant).
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ16X25-20 FAQ
At 0.5 MPa it pushes 100.5 N and pulls 86.4 N. At 0.7 MPa it pushes 140.7 N and pulls 120.9 N. The theoretical max force is 20.5 kgf at 1.0 MPa. The air port is M5×0.8.
An external screw shortens the extend stroke by up to 20 mm, while a needle valve adjusts the air cushion at both ends to decelerate the piston at high speed. The cushion only decelerates near stroke end—it is not a lock. The cylinder does not hold position on air loss; use an external rod lock for that.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ16X25-20
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.