Airtac MICJ Adjustable Mini Cylinder MICJ16X25-30
The AirTAC MICJ Adjustable Mini Cylinder MICJ16X25-30 is a genuine double acting, double rod, adjustable stroke + cushion round-body mini air cylinder with a Ø16mm bore and 25mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ16 mm
- Stroke25 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke + cushion
- Rod threadM6×1.0
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ16X25-30
Trim the forward stop by up to 30 mm on site without swapping cylinders, while twin adjustable air cushions soak up high-speed shock at both ends. This AirTAC MICJ16X25-30 is a double-acting, round-body stainless-steel mini cylinder built for mild corrosion and washdown resistance.
It conforms to the ISO 6432 mounting interface for easy bracket drops, features a 6 mm piston rod with an M6x1.0 male thread, and uses an M5×0.8 air port. Note this SKU lacks a magnet, so it cannot host CMSG/DMSG/EMSG sensors.
Airtac MICJ Adjustable Mini Cylinder MICJ16X25-30 Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ16X25-30 |
|---|---|
| Series | MICJ ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 25 mm |
| Acting type | Double acting, double rod, adjustable stroke + cushion |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ16X25-30
| MICJ | ISO 6432 round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 16 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| -30 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ16X25-30 Is Used
Micro-Clamp Actuation
Dials in the exact 10-25 mm forward clamp position on delicate electronic parts while the air cushion prevents impact cracking under rapid cycling.
Lab Sample Ejection
Ejects 5.1 kg sample trays vertically with a soft landing; the stainless build resists mild washdown chemicals in laboratory environments.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ16X25-30 the Right Cylinder?
For lighter duties the MIJ bumper-only series is the next step down, whereas stepping up to the Ø20 MICJ raises the 0.5 MPa push force to 157 N. Choose this Ø16 bore when you need precise set-position moves at speed; the external screw sets the extend end position, and the needle valves decelerate the piston near stroke end. Remember the stop screw is not a mid-stroke lock—the piston will drift on air loss, so fit an external rod lock or pilot check valve to hold a suspended load. Mount via LB foot, FA flange or TC trunnion (SDB pivot-block is not offered on adjustable-stroke types).
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ16X25-30 FAQ
The air port is M5×0.8 and the male rod thread is M6x1.0.
An external screw shortens the extend stroke by up to 30 mm for on-site tuning, while needle valves adjust the air cushion at both ends to decelerate the piston near stroke end (it is not a mid-stroke lock). This specific SKU has no magnet (-S), so it cannot accept CMSG/DMSG/EMSG sensors; you would need the -S variant for that.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ16X25-30
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.