Airtac MICJ Adjustable Mini Cylinder MICJ16X250-100S
The AirTAC MICJ Adjustable Mini Cylinder MICJ16X250-100S is a genuine double acting, double rod, adjustable stroke + cushion round-body mini air cylinder with a Ø16mm bore and 250mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ16 mm
- Stroke250 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke + cushion
- Rod threadM6×1.0
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ16X250-100S
Trimming the forward stop by up to 100 mm on-site, the AirTAC MICJ16X250-100S lets you dial in the extend position from 150 mm to the full 250 mm without swapping hardware. This double-acting round-body mini cylinder pairs that external screw adjustment with a needle-set air cushion at both ends, soaking up high-speed shock so you control both the end position and the impact.
Built with a stainless-steel barrel and rod for mild washdown resistance, the Ø16 bore conforms to the ISO 6432 mounting interface for easy bracket drops. The -S suffix means a piston magnet is installed for CMSG, DMSG, or EMSG sensors, and the M5×0.8 port keeps airflow compact.
Airtac MICJ Adjustable Mini Cylinder MICJ16X250-100S Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ16X250-100S |
|---|---|
| Series | MICJ ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 250 mm |
| Acting type | Double acting, double rod, adjustable stroke + cushion |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ16X250-100S
| MICJ | ISO 6432 round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 16 | Bore size in mm. |
| ×250 | Stroke length in mm. |
| -100 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ16X250-100S Is Used
Light-Part Dial-In Feed
Use the 100 mm extend adjustment to precisely set the push distance when feeding 5 kg material stacks, relying on the dual air cushions to absorb the impact of rapid 30-800 mm/s moves.
Carton Flap Tucking
Dial the forward stop to match varying carton depths on the fly; the stainless build handles mildly humid packing environments while the magnet enables DMSG position confirmation.
Divert and Stop Gate
Set the exact extend position to halt items on a belt without replacing the cylinder, using the adjustable cushion to soften the stop when cycling at high speeds.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ16X250-100S the Right Cylinder?
When sizing this 16 mm bore, step up to the MICJ20 if you need more push (157 N at 0.5 MPa), or drop to the MIJ bumper-only series if your load is lighter and requires no cushion. The MICJ16X250-100S shines in fast set-position moves where the 100 mm extend trim and dual adjustable cushions prevent end-of-stroke banging. Mount via LB foot, FA flange, or TC trunnion (the SDB pivot-block is not offered on adjustable-stroke variants), and match your sensing needs with CMSG/DMSG/EMSG switches via the built-in magnet. Remember that the stop screw sets the end position but does not act as a mid-stroke lock; the cylinder will drift on air loss, so add an external rod lock or pilot check valve for held loads.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ16X250-100S FAQ
An external screw shortens the extend stroke by up to 100 mm (usable range 150-250 mm), while a needle valve adjusts the air cushion at both ends to decelerate the piston near stroke end. The -S suffix enables CMSG/DMSG/EMSG sensors, but note the cushion only decelerates and does not lock the load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ16X250-100S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.