Airtac MICJ Adjustable Mini Cylinder MICJ16X250-75S
The AirTAC MICJ Adjustable Mini Cylinder MICJ16X250-75S is a genuine double acting, double rod, adjustable stroke + cushion round-body mini air cylinder with a Ø16mm bore and 250mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ16 mm
- Stroke250 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke + cushion
- Rod threadM6×1.0
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ16X250-75S
Dial in the forward stop without swapping hardware: the AirTAC MICJ16X250-75S uses an external screw to shorten the extend end position by up to 75 mm on site, yielding a usable forward range of 175-250 mm. This double-acting, round-body stainless-steel mini cylinder also features an adjustable air cushion at both ends, letting you soak up high-speed shock precisely as the piston reaches its trimmed endpoint.
Built with a stainless barrel and rod for mild washdown resistance, this Ø16 unit conforms to the ISO 6432 mounting interface for standard mini brackets. The -S suffix denotes a built-in piston magnet for CMSG, DMSG, or EMSG sensors, and the M5×0.8 port ensures reliable airflow.
Airtac MICJ Adjustable Mini Cylinder MICJ16X250-75S Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ16X250-75S |
|---|---|
| Series | MICJ ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 250 mm |
| Acting type | Double acting, double rod, adjustable stroke + cushion |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ16X250-75S
| MICJ | ISO 6432 round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 16 | Bore size in mm. |
| ×250 | Stroke length in mm. |
| -75 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ16X250-75S Is Used
Light Transfer Diverting
Move items weighing around 5 kg on a washdown line; the stainless construction handles mild splashing while the needle cushion absorbs high-speed cycling shocks.
Carton Positioning
Set a specific forward endpoint for aligning small cartons on an M5×0.8 ported pneumatic line, relying on the -S magnet and DMSG sensor to confirm the trimmed reach.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ16X250-75S the Right Cylinder?
The Ø16 is ideal when you need precise set-position moves at moderate speeds (30-800 mm/s) without overpowering the payload. The external stop screw and needle valve combination lets you tune both the landing position and the impact deceleration.
Remember that the stop screw sets the end position but is not a mid-stroke lock; the cylinder will drift on air loss, so add an external rod lock or pilot check valve for suspended loads. Mount using LB foot, FA flange, or TC trunnion (SDB pivot-block is not available on this adjustable variant), and pair it with CMSG/DMSG/EMSG switches via the -S magnet for position confirmation.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ16X250-75S FAQ
It uses an M5×0.8 port and a Ø6 mm rod with an M6x1.0 male thread.
An external screw shortens the extend stroke by up to 75 mm on-site, while the adjustable air cushion at both ends decelerates the piston near the end of travel to absorb shock. The cushion only decelerates and is not a brake; the cylinder drifts on air loss, so use an external rod lock for holding suspended loads.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ16X250-75S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.