Airtac MICJ Adjustable Mini Cylinder MICJ16X30-10S
The AirTAC MICJ Adjustable Mini Cylinder MICJ16X30-10S is a genuine double acting, double rod, adjustable stroke + cushion round-body mini air cylinder with a Ø16mm bore and 30mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ16 mm
- Stroke30 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke + cushion
- Rod threadM6×1.0
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ16X30-10S
Dial in a precise forward stop on the spot with this stainless-steel round-body mini cylinder, which trims the extend end by up to 10 mm via an external screw while a needle-set air cushion absorbs high-speed shock at both ends.
Built with a mildly corrosion-resistant stainless barrel and rod, this double-acting unit conforms to the ISO 6432 mounting interface for straightforward bracket interchange. The built-in magnet (-S) supports CMSG, DMSG and EMSG sensors for position feedback, and the adjustable cushion decelerates the load near the ends without acting as a mid-stroke lock.
Airtac MICJ Adjustable Mini Cylinder MICJ16X30-10S Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ16X30-10S |
|---|---|
| Series | MICJ ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 30 mm |
| Acting type | Double acting, double rod, adjustable stroke + cushion |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ16X30-10S
| MICJ | ISO 6432 round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 16 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ16X30-10S Is Used
Micro-Clamping Station
Holds delicate electronic components with a 60 N working load while the 10 mm extend trim dials in the exact grip position without crashing.
Film Feed Tensioner
Advances packaging film at speed and uses the adjustable air cushion to prevent jerk at the 30 mm extend limit, ensuring a smooth web path.
Lab Dispense Head
Positions a fluid nozzle precisely in a washdown environment; the stainless build resists mild corrosion while the magnet confirms stroke end.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ16X30-10S the Right Cylinder?
For lighter duties, the MIJ bumper-only series lacks the air cushion, making this MICJ the better choice when you need controlled deceleration at 30-800 mm/s; stepping up to the Ø20 bore raises the 0.5 MPa push force to 157 N if 100.5 N is insufficient. The external stop screw is ideal for fast set-position moves, but remember it only trims the extend end and does not hold the load on air loss—specify an external rod lock or pilot check valve if drift is unacceptable.
Mounting options include LB foot, FA flange and TC trunnion (SDB pivot-block is not available on this adjustable variant), and the -S magnet enables CMSG/DMSG/EMSG switches for exact stroke confirmation.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ16X30-10S FAQ
An external screw shortens the extend stroke by up to 10 mm (usable 20-30 mm), and the needle-set air cushion decelerates the piston at both ends. The cushion is not a brake; the cylinder drifts on air loss, so use a pilot check valve for load holding. The -S magnet supports CMSG/DMSG/EMSG sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ16X30-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.