Airtac MICJ Adjustable Mini Cylinder MICJ16X300-100S
The AirTAC MICJ Adjustable Mini Cylinder MICJ16X300-100S is a genuine double acting, double rod, adjustable stroke + cushion round-body mini air cylinder with a Ø16mm bore and 300mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ16 mm
- Stroke300 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke + cushion
- Rod threadM6×1.0
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ16X300-100S
Dial in a precise forward stop on-site without swapping cylinders: the MICJ16X300-100S uses an external screw to shorten the extend stroke by up to 100 mm, giving a usable forward range of 200-300 mm. The retract stroke remains full length. Built as a stainless-steel, riveted round-body mini cylinder, it carries a built-in piston magnet (-S) for CMSG, DMSG or EMSG sensors.
It conforms to the ISO 6432 mounting interface and uses an M5×0.8 port.
Airtac MICJ Adjustable Mini Cylinder MICJ16X300-100S Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ16X300-100S |
|---|---|
| Series | MICJ ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 300 mm |
| Acting type | Double acting, double rod, adjustable stroke + cushion |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ16X300-100S
| MICJ | ISO 6432 round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 16 | Bore size in mm. |
| ×300 | Stroke length in mm. |
| -100 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ16X300-100S Is Used
Light-Part Ejection
Tune the 200-300 mm extend stop to eject 5 kg parts precisely, while the adjustable air cushion absorbs the impact of fast 16 mm bore movements.
Variable Stroke Pusher
Shorten the extend stroke by up to 100 mm to push boxes of different depths, using the double-acting action and ISO 6432 brackets for easy integration.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ16X300-100S the Right Cylinder?
For lighter duties, the smaller 16 mm bore is the entry point here (the MIJ bumper-only series sits below it). If your application needs more push, step up to the Ø20 bore, which provides 157.0 N at 0.5 MPa. This adjustable-stroke variant shines in fast set-position moves where you need to tune the end point without machining new stops.
The external screw sets the end position but is not a mid-stroke lock; the piston will drift on air loss, so fit an external rod lock or pilot check valve for held loads. You can use LB, FA or TC mounts (SDB is unavailable on this variant), and the -S magnet enables CMSG/DMSG/EMSG switches.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ16X300-100S FAQ
This 16 mm bore cylinder has an M5×0.8 port.
An external screw shortens the extend end by up to 100 mm (retract stays full), while a needle-set air cushion at both ends decelerates the piston near stroke ends. The cushion is not a brake; the piston drifts on air loss, so use an external rod lock for holding. The -S suffix enables CMSG/DMSG/EMSG sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ16X300-100S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.