Airtac MICJ Adjustable Mini Cylinder MICJ16X300-30
The AirTAC MICJ Adjustable Mini Cylinder MICJ16X300-30 is a genuine double acting, double rod, adjustable stroke + cushion round-body mini air cylinder with a Ø16mm bore and 300mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ16 mm
- Stroke300 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke + cushion
- Rod threadM6×1.0
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ16X300-30
Dial in the forward stop without swapping cylinders: the AirTAC MICJ16X300-30 uses an external screw to shorten the extend end position by up to 30 mm on site, yielding a usable 270-300 mm forward travel while retract remains full. This double-acting, round-body stainless-steel mini cylinder pairs that settable stop with an adjustable air cushion at both ends, soaking up high-speed shock so you control both the position and the impact.
Built with a stainless barrel and piston rod for mild washdown resistance, the Ø16 bore conforms to the ISO 6432 mounting interface for standard mini brackets. It pushes with 100.5 N and pulls with 86.4 N at 0.5 MPa. This SKU lacks a magnet, so it cannot take CMSG/DMSG/EMSG sensors; specify the -S variant if you need position detection. Air ports are M5×0.8.
Airtac MICJ Adjustable Mini Cylinder MICJ16X300-30 Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ16X300-30 |
|---|---|
| Series | MICJ ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 300 mm |
| Acting type | Double acting, double rod, adjustable stroke + cushion |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ16X300-30
| MICJ | ISO 6432 round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 16 | Bore size in mm. |
| ×300 | Stroke length in mm. |
| -30 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ16X300-30 Is Used
Gauge Positioning
Trim the 300 mm extend stroke by up to 30 mm to hit an exact gauging distance, while the dual air cushions absorb impact at 800 mm/s.
Stopper Gate
Set a precise forward stop for small parts on a conveyor, adjusting the end position on site without changing hardware.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ16X300-30 the Right Cylinder?
The adjustable stop plus dual cushions shine in fast set-position moves where you must trim the forward end on the fly. Note that the stop screw sets the end position but is not a mid-stroke lock; the piston drifts on air loss. For a held load, install an external rod lock or pilot check valve. Mount via LB foot, FA flange, or TC trunnion (SDB pivot-block is not available on this adjustable variant).
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ16X300-30 FAQ
At 0.5 MPa it pushes 100.5 N and pulls 86.4 N. At 0.7 MPa it pushes 140.7 N and pulls 120.9 N. The theoretical max force is 20.5 kgf at 1.0 MPa. The air port is M5×0.8.
An external screw shortens the extend stroke by up to 30 mm (retract stays full). Needle valves adjust the air cushions at both ends to decelerate high-speed moves. The stop screw is not a mid-stroke lock; the piston drifts on air loss, so use an external rod lock to hold a load. This non-S SKU lacks a magnet for sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ16X300-30
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.