Airtac MICJ Adjustable Mini Cylinder MICJ16X35-10S
The AirTAC MICJ Adjustable Mini Cylinder MICJ16X35-10S is a genuine double acting, double rod, adjustable stroke + cushion round-body mini air cylinder with a Ø16mm bore and 35mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ16 mm
- Stroke35 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke + cushion
- Rod threadM6×1.0
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ16X35-10S
Trim the forward stop by up to 10 mm on-site without swapping hardware using the AirTAC MICJ16X35-10S. This 16 mm bore, double-acting stainless-steel round-body mini cylinder pairs that adjustable extend stroke with a needle-set variable air cushion at both ends, letting you dial in the exact 25-35 mm forward position while soaking up high-speed impact. The built-in magnet (-S) supports CMSG, DMSG, and EMSG switches for exact end-of-stroke sensing.
It uses the ISO 6432 mounting interface for easy bracket interchangeability and features an M5×0.8 port with an M6x1.0 male rod thread. The stainless barrel and rod provide reliable mild corrosion and washdown resistance.
Airtac MICJ Adjustable Mini Cylinder MICJ16X35-10S Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ16X35-10S |
|---|---|
| Series | MICJ ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 35 mm |
| Acting type | Double acting, double rod, adjustable stroke + cushion |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ16X35-10S
| MICJ | ISO 6432 round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 16 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ16X35-10S Is Used
Light Part Ejection
Dial in a 30 mm extend stroke to push small plastic parts out of a mold, relying on the dual air cushions to prevent endcap slam at high cycling speeds.
Component Pressing
Gently seat electronic connectors onto a PCB, adjusting the forward stop by up to 10 mm to perfect the insertion depth without changing the cylinder mount.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ16X35-10S the Right Cylinder?
For lighter duty, the MIJ bumper-only series lacks this adjustable air cushion, making the MICJ16 your entry point for controlled shock absorption. If your move requires more push, stepping up to the Ø20 bore raises the 0.5 MPa push force to 157 N. The external stop screw is ideal for fast set-position moves, but remember it only trims the extend end and does not lock the piston mid-stroke. If you need to hold a load vertically on air loss, add an external rod lock or pilot check valve. Mount via LB foot, FA flange, or TC trunnion (SDB is not offered here), and use the -S magnet for sensor feedback.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ16X35-10S FAQ
This 16 mm bore cylinder uses an M5×0.8 port and an M6x1.0 male rod thread.
An external screw shortens the extend stroke by up to 10 mm (usable range 25-35 mm), while the needle-set air cushion at both ends decelerates the piston near stroke end to absorb shock. The cushion only decelerates and the screw only sets the end position; neither acts as a mid-stroke lock, so the piston will drift on air loss unless you use an external rod lock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ16X35-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.