Airtac MICJ Adjustable Mini Cylinder MICJ16X35-20S
The AirTAC MICJ Adjustable Mini Cylinder MICJ16X35-20S is a genuine double acting, double rod, adjustable stroke + cushion round-body mini air cylinder with a Ø16mm bore and 35mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ16 mm
- Stroke35 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke + cushion
- Rod threadM6×1.0
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ16X35-20S
Trim the forward stop by up to 20 mm on site without swapping cylinders, then let the adjustable air cushion at both ends soak up the high-speed shock. The MICJ16X35-20S is a double-acting, round-body stainless-steel mini cylinder with a built-in piston magnet (-S) for CMSG, DMSG or EMSG sensors. Its M5×0.8 port and Ø6 mm rod conform to the ISO 6432 mounting interface for easy bracket drops.
The external screw sets the extend end position only (usable 15-35 mm); it is not a mid-stroke lock. The stainless barrel and rod resist mild washdown corrosion.
Airtac MICJ Adjustable Mini Cylinder MICJ16X35-20S Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ16X35-20S |
|---|---|
| Series | MICJ ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 35 mm |
| Acting type | Double acting, double rod, adjustable stroke + cushion |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ16X35-20S
| MICJ | ISO 6432 round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 16 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| -20 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ16X35-20S Is Used
Light-Part Ejection
Eject 5 kg electronics parts from a tester. The stainless build handles mild washdown, while the 20 mm stop screw fine-tunes the drop distance.
Lab Dispense Stop
Set a precise forward stop for a fluid dispense head. The -S magnet tracks position with a DMSG sensor, and the cushion prevents needle impact.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ16X35-20S the Right Cylinder?
For lighter moves, the MIJ bumper-only series is the next step down; if you need more push, the Ø20 bore delivers 157.0 N at 0.5 MPa. Pick this Ø16 model when you need fast, set-position actuation where the 20 mm extend trim and dual air cushions prevent end-of-stroke banging. Speeds run 30-800 mm/s.
Because the stop screw only sets the end position and the cushion only decelerates, the piston will drift on air loss—add an external rod lock or pilot check valve to hold a load. Mount via LB foot, FA flange or TC trunnion (SDB is not offered on this adjustable variant), and use the -S magnet to fit reed or electronic switches.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ16X35-20S FAQ
It has an M5×0.8 port. At 0.5 MPa it pushes 100.5 N and pulls 86.4 N; at 0.7 MPa it pushes 140.7 N and pulls 120.9 N. The theoretical max force is 20.5 kgf at 1.0 MPa.
An external screw shortens the extend stroke by up to 20 mm (retract stays full). Needle valves adjust the air cushion at both ends to decelerate the piston near stroke end—it is not a mid-stroke lock. The -S suffix means it has a built-in magnet for CMSG, DMSG or EMSG sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ16X35-20S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.