Airtac MICJ Adjustable Mini Cylinder MICJ16X45-10S
The AirTAC MICJ Adjustable Mini Cylinder MICJ16X45-10S is a genuine double acting, double rod, adjustable stroke + cushion round-body mini air cylinder with a Ø16mm bore and 45mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ16 mm
- Stroke45 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke + cushion
- Rod threadM6×1.0
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ16X45-10S
Trim the forward stop by up to 10 mm on site with the AirTAC MICJ16X45-10S, a double-acting stainless-steel round-body mini cylinder. The external screw shortens the extend end position from a 45 mm nominal down to 35 mm, while a needle-set adjustable air cushion at both ends soaks up high-speed shock. Because this SKU includes the -S magnet, it directly supports CMSG, DMSG, and EMSG position switches.
Built with a riveted stainless barrel and rod, the design resists mild corrosion and handles speeds from 30 to 800 mm/s. It conforms to the ISO 6432 mounting interface for standard mini brackets. Note that the stop screw sets the end position but does not lock the piston mid-stroke.
Airtac MICJ Adjustable Mini Cylinder MICJ16X45-10S Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ16X45-10S |
|---|---|
| Series | MICJ ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 45 mm |
| Acting type | Double acting, double rod, adjustable stroke + cushion |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ16X45-10S
| MICJ | ISO 6432 round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 16 | Bore size in mm. |
| ×45 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ16X45-10S Is Used
Light Parts Sealing
Dial in the exact 35-45 mm extend contact point to press a light lid or membrane without crushing it, using the air cushion to absorb the 100.5 N impact.
Sensor Bracket Push
Extend slowly to snap a bracket into a groove, relying on the 5.1 kg vertical lift capacity and the -S magnet to confirm the end position.
Small Package Divert
Rapidly push small cartons on a belt at up to 800 mm/s, letting the adjustable cushion catch the shock while the stop screw sets the exact reach.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ16X45-10S the Right Cylinder?
The adjustable extend stop plus dual air cushions shine in fast set-position moves where you need to dial in the exact forward contact point without swapping cylinders. Mount via LB foot, FA flange, or TC trunnion (the SDB pivot-block is not available on this adjustable variant). For vertical loads, remember the cylinder drifts on air loss—the cushion only decelerates near the end of travel, so add an external rod lock or pilot check valve to hold the load.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ16X45-10S FAQ
An external screw shortens the extend stroke by up to 10 mm, and a needle valve adjusts the air cushion at both ends to absorb high-speed shock. The cylinder is double-acting, includes a magnet for CMSG/DMSG/EMSG sensors, and does not lock the load on air loss.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ16X45-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.