Airtac MICJ Adjustable Mini Cylinder MICJ16X50-10
The AirTAC MICJ Adjustable Mini Cylinder MICJ16X50-10 is a genuine double acting, double rod, adjustable stroke + cushion round-body mini air cylinder with a Ø16mm bore and 50mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ16 mm
- Stroke50 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke + cushion
- Rod threadM6×1.0
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ16X50-10
Trim the forward stop by up to 10 mm on site with the AirTAC MICJ16X50-10, a stainless-steel round-body mini cylinder that pairs an adjustable extend stroke with a needle-set air cushion at both ends. The external screw lets you fine-tune the 50 mm extend end position down to 40 mm without swapping parts, while the cushions soak up high-speed shock. Retract remains a full 50 mm stroke.
The stainless barrel and rod resist mild corrosion and washdown. Note this SKU lacks a magnet and cannot host CMSG/DMSG/EMSG sensors.
Airtac MICJ Adjustable Mini Cylinder MICJ16X50-10 Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ16X50-10 |
|---|---|
| Series | MICJ ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 50 mm |
| Acting type | Double acting, double rod, adjustable stroke + cushion |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ16X50-10
| MICJ | ISO 6432 round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 16 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ16X50-10 Is Used
Light-Part Ejection
Dial in the 10 mm extend stop to eject 5 kg electronics trays precisely, letting the dual air cushions absorb the impact at high cycle speeds.
Lab Dispense Positioning
Set an exact 40 mm extend stop for a fluid dispense head, using the stainless construction and adjustable end cushions for reliable, washdown-safe lab automation.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ16X50-10 the Right Cylinder?
For lighter duty, the MIJ bumper-only series is the next step down, as the cushioned MICJ line starts at this Ø16 bore. If your application requires more force, stepping up to the Ø20 bore raises the 0.5 MPa push force to 157 N. This MICJ16X50-10 excels in fast set-position moves where you need to dial in the exact forward stop and rely on the dual air cushions to decelerate the load smoothly.
The stop screw sets the end position but is not a mid-stroke lock; the piston will drift on air loss, so add an external rod lock or pilot check valve to hold a suspended load. Mount using LB foot, FA flange, or TC trunnion brackets (SDB pivot-block is not available here). Because this specific SKU has no -S magnet, it cannot accept position sensors.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ16X50-10 FAQ
This 16 mm bore cylinder uses an M5×0.8 port and a 6 mm rod.
An external screw shortens the extend stroke by up to 10 mm (usable range 40-50 mm), while needle valves adjust the air cushions at both ends to decelerate high-speed moves. This SKU has no -S magnet, so it cannot accept CMSG/DMSG/EMSG sensors; you would need the -S variant for sensing.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ16X50-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.