Airtac MICJ Adjustable Mini Cylinder MICJ16X60-10
The AirTAC MICJ Adjustable Mini Cylinder MICJ16X60-10 is a genuine double acting, double rod, adjustable stroke + cushion round-body mini air cylinder with a Ø16mm bore and 60mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ16 mm
- Stroke60 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke + cushion
- Rod threadM6×1.0
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ16X60-10
Dial in the forward stop on site with the AirTAC MICJ16X60-10, a stainless-steel round-body mini cylinder that shortens the extend stroke by up to 10 mm via an external screw. The usable extend range is 50-60 mm, while the retract stroke remains full. An adjustable air cushion at both ends soaks up high-speed shock so you set the position and control the impact.
Built to the ISO 6432 mini-cylinder mounting interface, this 16 mm bore unit pushes 100.5 N at 0.5 MPa. The stainless barrel and rod resist mild corrosion and washdown. Note this SKU lacks a magnet, so it cannot take CMSG/DMSG/EMSG sensors; the M5×0.8 port and M6x1.0 male rod thread match standard mini fittings.
Airtac MICJ Adjustable Mini Cylinder MICJ16X60-10 Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ16X60-10 |
|---|---|
| Series | MICJ ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 60 mm |
| Acting type | Double acting, double rod, adjustable stroke + cushion |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ16X60-10
| MICJ | ISO 6432 round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 16 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ16X60-10 Is Used
Light Part Ejection
Eject small plastic parts from a mold at speed, using the 10 mm extend trim to hit the exact drop position while the dual air cushions absorb the end-of-stroke impact.
Lab Dispense Head
Drive a low-force dispense head in a washdown-resistant stainless build, relying on the adjustable cushion to prevent fluid splashing when the 60 mm stroke ends.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ16X60-10 the Right Cylinder?
Choose this model when you need fast, settable-position moves under 60 N. The external stop screw sets the extend end position but is not a mid-stroke lock—the piston drifts on air loss, so add an external rod lock or pilot check valve to hold a suspended load.
Mount using LB foot, FA flange, or TC trunnion brackets (SDB pivot-block is not available on this adjustable variant). Because this specific SKU has no -S magnet, it cannot accept position sensors; select a -S variant if you need CMSG/DMSG/EMSG switches.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ16X60-10 FAQ
At 0.5 MPa this 16 mm bore double-acting cylinder pushes 100.5 N and pulls 86.4 N. At 0.7 MPa it pushes 140.7 N and pulls 120.9 N. The theoretical maximum force is 20.5 kgf at 1.0 MPa.
An external screw shortens the extend end position by up to 10 mm (usable extend 50-60 mm); retract stays full. Needle valves adjust the air cushion at both ends to decelerate the piston near stroke ends. The cylinder does not hold position on air loss—the piston drifts—so use an external rod lock for suspended loads. This non-S SKU has no magnet and cannot take sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ16X60-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.