Airtac MICJ Adjustable Mini Cylinder MICJ16X60-20
The AirTAC MICJ Adjustable Mini Cylinder MICJ16X60-20 is a genuine double acting, double rod, adjustable stroke + cushion round-body mini air cylinder with a Ø16mm bore and 60mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ16 mm
- Stroke60 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke + cushion
- Rod threadM6×1.0
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ16X60-20
Dial in a precise forward stop on-site with the AirTAC MICJ16X60-20, a stainless-steel round-body mini cylinder that lets you shorten the extend stroke by up to 20 mm via an external screw. Because it also features an adjustable air cushion at both ends, you can set the exact end position and simultaneously soak up high-speed impact shock.
The stainless barrel and piston rod provide reliable mild corrosion and washdown resistance. Note this SKU lacks a magnet, so it cannot accept CMSG, DMSG or EMSG sensors; choose the -S variant if you need position detection.
Airtac MICJ Adjustable Mini Cylinder MICJ16X60-20 Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ16X60-20 |
|---|---|
| Series | MICJ ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 60 mm |
| Acting type | Double acting, double rod, adjustable stroke + cushion |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ16X60-20
| MICJ | ISO 6432 round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 16 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -20 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ16X60-20 Is Used
Light Parts Ejection
Eject small molded parts at speed, using the 20 mm extend-stop screw to tune the drop point without moving the cylinder bracket, while the air cushion absorbs the end-of-stroke shock.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ16X60-20 the Right Cylinder?
When sizing this 16 mm bore, compare it directly to the next size up: the Ø20 bore pushes 157 N at 0.5 MPa, whereas this Ø16 pushes 100.5 N. If your load is lighter, the smaller MIJ bumper-only series is the alternative, but this MICJ gives you the dual advantage of a 20 mm extend-stop screw and needle-controlled shock absorption for fast, settable-position moves. The stop screw sets the end position but is not a mid-stroke lock, and the cushion only decelerates near the stroke end. If you need to hold a load on air loss, add an external rod lock or pilot check valve. Mount via LB foot, FA flange or TC trunnion (SDB is not offered on this adjustable variant).
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ16X60-20 FAQ
This 16 mm bore cylinder has an M5×0.8 port and a 6 mm rod. At 0.5 MPa it pushes 100.5 N and pulls 86.4 N. At 0.7 MPa it pushes 140.7 N and pulls 120.9 N. The theoretical maximum force is 20.5 kgf at 1.0 MPa.
An external screw shortens the extend stroke by up to 20 mm (usable extend 40-60 mm), while a needle valve adjusts the air cushion at both ends to decelerate high-speed moves. The cylinder does not hold position on air loss and the cushion is not a brake; use an external rod lock for holding. This specific SKU has no magnet and cannot take sensors; the -S variant is required for CMSG/DMSG/EMSG switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ16X60-20
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.