Airtac MICJ Adjustable Mini Cylinder MICJ16X60-20S
The AirTAC MICJ Adjustable Mini Cylinder MICJ16X60-20S is a genuine double acting, double rod, adjustable stroke + cushion round-body mini air cylinder with a Ø16mm bore and 60mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ16 mm
- Stroke60 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke + cushion
- Rod threadM6×1.0
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ16X60-20S
Dial in your forward stop on-site with the AirTAC MICJ16X60-20S, a 16mm bore stainless-steel round-body mini cylinder that shortens the extend stroke by up to 20mm via an external screw. A needle-set adjustable air cushion at both ends absorbs high-speed shock, letting you set the exact end position while controlling impact. The built-in magnet (-S) supports CMSG, DMSG, and EMSG sensors for position detection.
The stainless barrel and rod resist mild corrosion and washdown environments.
Airtac MICJ Adjustable Mini Cylinder MICJ16X60-20S Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ16X60-20S |
|---|---|
| Series | MICJ ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 60 mm |
| Acting type | Double acting, double rod, adjustable stroke + cushion |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ16X60-20S
| MICJ | ISO 6432 round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 16 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -20 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ16X60-20S Is Used
Light-Part Ejection
Shoots small plastic parts out of a mold at high speed, using the 20mm extend trim to hit the exact drop position while the air cushion prevents end-of-stroke banging.
Sensor Sorting
Diverts small electronic components on a conveyor using the integrated magnet for DMSG position sensing, relying on the 60N safe load to pivot light gates.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ16X60-20S the Right Cylinder?
Choose this 16mm bore when your fast, settable-position moves require roughly 60N of safe working force. The external stop screw and dual cushions excel in high-speed cycling, but note the cylinder does not hold position on air loss—the piston drifts, so add an external rod lock or pilot check valve for suspended loads.
This -S variant includes a piston magnet for CMSG/DMSG/EMSG switches. Mount using standard ISO 6432 brackets like LB foot, FA flange, or TC trunnion (SDB pivot-block is not available on this adjustable-stroke model).
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ16X60-20S FAQ
This 16mm bore cylinder uses an M5×0.8 port. The theoretical maximum force is 20.5kgf at 1.0MPa.
An external screw shortens the extend stroke by up to 20mm (usable extend 40-60mm), while a needle valve adjusts the air cushion at both ends to absorb high-speed shock. The cushion only decelerates near the end and is not a brake; the cylinder will drift on air loss, so use an external rod lock to hold a load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ16X60-20S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.