Airtac MICJ Adjustable Mini Cylinder MICJ16X60-30
The AirTAC MICJ Adjustable Mini Cylinder MICJ16X60-30 is a genuine double acting, double rod, adjustable stroke + cushion round-body mini air cylinder with a Ø16mm bore and 60mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ16 mm
- Stroke60 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke + cushion
- Rod threadM6×1.0
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ16X60-30
Trim the forward stop by up to 30 mm on site without swapping cylinders using the AirTAC MICJ16X60-30. This 16 mm bore, double-acting stainless steel round-body mini cylinder pairs that adjustable extend stroke with a needle-set air cushion at both ends to soak up high-speed shock, letting you dial in the exact position and control the impact.
It conforms to the ISO 6432 mounting interface for standard mini brackets, uses an M5×0.8 port, and features a corrosion-resistant stainless barrel and rod. Note this SKU lacks a magnet and cannot take sensors.
Airtac MICJ Adjustable Mini Cylinder MICJ16X60-30 Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ16X60-30 |
|---|---|
| Series | MICJ ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 60 mm |
| Acting type | Double acting, double rod, adjustable stroke + cushion |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ16X60-30
| MICJ | ISO 6432 round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 16 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -30 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ16X60-30 Is Used
Package Diverting
Deploy a fast diverting gate on a conveyor, relying on the adjustable air cushions to absorb shock at high speeds while hitting a precise stop position every cycle.
Lab Dispense Positioning
Move a dispensing head into place with exact 5.1 kg vertical lift margin, using the external screw to fine-tune the extend endpoint for accurate fluid application.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ16X60-30 the Right Cylinder?
The adjustable 30 mm extend stop plus twin air cushions shine in fast set-position moves where you must tune the forward endpoint precisely.
Keep in mind the stop screw sets the end position but acts as no mid-stroke lock; the cylinder drifts on air loss, so add an external rod lock or pilot check valve to hold a suspended load. Mount via LB foot, FA flange, or TC trunnion (SDB pivot-block is unavailable), and select the -S variant if you need CMSG, DMSG, or EMSG sensors.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ16X60-30 FAQ
This double-acting cylinder pushes 100.5 N and pulls 86.4 N at 0.5 MPa, and pushes 140.7 N and pulls 120.9 N at 0.7 MPa. The theoretical max force is 20.5 kgf at 1.0 MPa, and it uses an M5×0.8 air port.
An external screw shortens the extend stroke by up to 30 mm on-site, while a needle valve adjusts the air cushion at both ends to decelerate the piston near stroke end. This SKU has no magnet for sensors, and the cushion is not a brake; the piston drifts on air loss, so use an external rod lock to hold a load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ16X60-30
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.