Airtac MICJ Adjustable Mini Cylinder MICJ16X60-75S
The AirTAC MICJ Adjustable Mini Cylinder MICJ16X60-75S is a genuine double acting, double rod, adjustable stroke + cushion round-body mini air cylinder with a Ø16mm bore and 60mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ16 mm
- Stroke60 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke + cushion
- Rod threadM6×1.0
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ16X60-75S
Trim the forward stop by up to 75 mm on site without swapping cylinders using this stainless-steel, round-body mini actuator. The external screw adjusts the extend end position only, while a needle-set variable air cushion at both ends soaks up high-speed shock.
Because this SKU includes the -S magnet, it is ready for CMSG, DMSG, or EMSG position switches. The Ø16 body conforms to the ISO 6432 mounting interface, dropping directly into standard mini brackets and clevises. The stainless barrel and rod resist mild corrosion and washdown environments. Note that the stop screw sets the end position but does not function as a mid-stroke lock; the piston will drift on air loss.
Airtac MICJ Adjustable Mini Cylinder MICJ16X60-75S Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ16X60-75S |
|---|---|
| Series | MICJ ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 60 mm |
| Acting type | Double acting, double rod, adjustable stroke + cushion |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ16X60-75S
| MICJ | ISO 6432 round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 16 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -75 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ16X60-75S Is Used
Adjustable Diverter
Fine-tune the 60 mm extend stroke by up to 75 mm to position a package diverter accurately, letting the air cushion absorb the impact of high-speed routing.
Lab Dispensing
Use the -S magnet with an EMSG sensor to confirm the extend position for liquid dispensing cycles, relying on the stainless build for mild washdown resistance.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ16X60-75S the Right Cylinder?
This model is ideal when you need fast, settable-position moves up to 60 mm with controlled deceleration. You can mount it via LB foot, FA flange, or TC trunnion, but the SDB pivot-block is not available on this adjustable variant. To hold a vertical load securely on air loss, add an external rod lock or pilot-operated check valve, as the cushion only decelerates near the stroke end.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ16X60-75S FAQ
This 16 mm bore cylinder uses an M5×0.8 air port and a 6 mm rod.
An external screw shortens the extend stroke by up to 75 mm, and a needle valve adjusts the air cushion at both ends to absorb shock. The -S suffix enables CMSG, DMSG, and EMSG sensors. The cushion only decelerates near the end of travel; it is not a brake, so the piston will drift on air loss.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ16X60-75S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.