Airtac MICJ Adjustable Mini Cylinder MICJ16X75-10S
The AirTAC MICJ Adjustable Mini Cylinder MICJ16X75-10S is a genuine double acting, double rod, adjustable stroke + cushion round-body mini air cylinder with a Ø16mm bore and 75mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ16 mm
- Stroke75 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke + cushion
- Rod threadM6×1.0
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ16X75-10S
Trim the forward stop by up to 10 mm on site without swapping hardware using this stainless-steel, round-body mini cylinder. The MICJ16X75-10S is double-acting with a nominal 75 mm stroke, yielding a usable extend range of 65 to 75 mm, and integrates a needle-set adjustable air cushion at both ends to absorb high-speed shock.
The built-in magnet (-S) supports CMSG, DMSG and EMSG sensors, and the M5×0.8 port conforms to the ISO 6432 mounting interface for standard mini brackets.
Airtac MICJ Adjustable Mini Cylinder MICJ16X75-10S Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ16X75-10S |
|---|---|
| Series | MICJ ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 75 mm |
| Acting type | Double acting, double rod, adjustable stroke + cushion |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ16X75-10S
| MICJ | ISO 6432 round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 16 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ16X75-10S Is Used
Light Parts Ejection
Pushes small molded components out of a fixture, using the 10 mm extend adjustment to dial in the exact drop point without retooling the head.
Package Diverter
Diverts lightweight cartons on a belt line; the dual air cushions absorb the high-speed impact at the 75 mm extend end for quiet operation.
Sensor Positioning
Moves a testing probe into place using the -S magnet with a DMSG switch to confirm the retracted position before the next cycle begins.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ16X75-10S the Right Cylinder?
If you need more thrust, stepping up to the 20 mm bore raises push force to 157.0 N. The external stop screw and dual cushions are ideal for fast, repeatable set-position moves.
The stop screw sets the extend end position but is not a mid-stroke lock; the piston will drift on air loss, so add an external rod lock or pilot check valve to hold a suspended load. Use LB, FA or TC mounts (SDB is unavailable here), and pair the -S magnet with CMSG/DMSG/EMSG switches for position sensing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ16X75-10S FAQ
This 16 mm bore cylinder has an M5×0.8 port.
An external screw shortens the extend stroke by up to 10 mm (usable extend 65-75 mm), while the needle-set air cushion at both ends decelerates the piston near stroke ends. It does not hold position on air loss; use an external rod lock for that. The -S magnet enables CMSG, DMSG and EMSG sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ16X75-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.