Airtac MICJ Adjustable Mini Cylinder MICJ16X75-10SLB
The AirTAC MICJ Adjustable Mini Cylinder MICJ16X75-10SLB is a genuine double acting, double rod, adjustable stroke + cushion round-body mini air cylinder with a Ø16mm bore and 75mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ16 mm
- Stroke75 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke + cushion
- Rod threadM6×1.0
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ16X75-10SLB
Dial in a precise forward stop on-site with the AirTAC MICJ16X75-10SLB, a stainless-steel round-body mini cylinder featuring an external screw that shortens the extend stroke by up to 10 mm. This double-acting actuator pairs that on-site adjustability with a needle-set variable air cushion at both ends, soaking up high-speed shock precisely as the piston reaches its end position.
The stainless barrel and piston rod provide mild corrosion resistance for washdown environments, while the built-in magnet (-S) supports CMSG, DMSG, and EMSG sensors for position detection. Conforming to the ISO 6432 mounting interface for mini cylinders, it drops directly into standard brackets and clevises. Air connects via an M5×0.8 port, and the unit operates smoothly at speeds from 30 to 800 mm/s across a -20 to +70 C temperature range.
Airtac MICJ Adjustable Mini Cylinder MICJ16X75-10SLB Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ16X75-10SLB |
|---|---|
| Series | MICJ ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 75 mm |
| Acting type | Double acting, double rod, adjustable stroke + cushion |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ16X75-10SLB
| MICJ | ISO 6432 round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 16 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ16X75-10SLB Is Used
Micro-Clamp Actuation
Drives a small machining fixture clamp, using the 10 mm extend adjustment to dial in the exact forward stop without reprogramming the machine, while the air cushion prevents shock at 800 mm/s.
Lab Dispenser Positioning
Acts as a washdown-resistant stainless steel probe actuator in a lab setting, using the -S magnet with a DMSG sensor to confirm the retracted position before dispensing.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ16X75-10SLB the Right Cylinder?
The MICJ16X75-10SLB is ideal for fast, settable-position moves where you need to tune the forward stop without swapping hardware, though the stop screw only trims the extend end and does not function as a mid-stroke lock.
This SKU includes the LB foot mounting bracket and the -S magnet for electronic or reed switches. Note that the SDB pivot-block is not available on this adjustable-stroke variant. Because a standard cylinder does not hold position on air loss, the piston will drift if pressure drops; for suspended or gravity-loaded applications, install an external rod lock or pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ16X75-10SLB FAQ
This 16 mm bore cylinder uses an M5×0.8 air port. At 0.7 MPa, push increases to 140.7 N and pull to 120.9 N. The theoretical maximum force is 20.5 kgf at 1.0 MPa.
An external stop screw shortens the extend stroke by up to 10 mm (usable extend 65-75 mm), allowing you to set the forward end position on-site; retract remains full stroke. The needle-set variable air cushion at both ends decelerates the piston near the ends to absorb high-speed impact. Note that this cushion only decelerates and does not lock or hold the load mid-stroke.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ16X75-10SLB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.