Airtac MICJ Adjustable Mini Cylinder MICJ16X75-10STC
The AirTAC MICJ Adjustable Mini Cylinder MICJ16X75-10STC is a genuine double acting, double rod, adjustable stroke + cushion round-body mini air cylinder with a Ø16mm bore and 75mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ16 mm
- Stroke75 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke + cushion
- Rod threadM6×1.0
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ16X75-10STC
Trim the forward stop by up to 10 mm on site without swapping hardware: this double-acting stainless round-body mini cylinder pairs an external extend adjuster with a needle-set air cushion at both ends to soak up high-speed shock. Built to ISO 6432 mounting dimensions, it drops into standard mini brackets, while the stainless barrel and rod resist mild washdown corrosion. The -S magnet enables CMSG, DMSG and EMSG sensors for position feedback.
With a nominal 75 mm stroke, the usable extend range is 65-75 mm, letting you fine-tune the landing position of fast moves. The cushion only decelerates the piston near the end of travel; it is not a mid-stroke lock.
Airtac MICJ Adjustable Mini Cylinder MICJ16X75-10STC Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ16X75-10STC |
|---|---|
| Series | MICJ ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 75 mm |
| Acting type | Double acting, double rod, adjustable stroke + cushion |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ16X75-10STC
| MICJ | ISO 6432 round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 16 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ16X75-10STC Is Used
Light-Part Ejection
Dial in the 10 mm extend stop to eject 5 kg plastic parts from a mold consistently, relying on the air cushion to absorb the impact of fast 800 mm/s strokes.
Lab Sample Dispensing
Use the stainless construction and 65-75 mm adjustable extend window to precisely stop a dispensing head over washdown-friendly lab benches.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ16X75-10STC the Right Cylinder?
The Ø16 is ideal when you need precise end-position tuning combined with shock absorption for fast 30-800 mm/s cycles. The TC trunnion mount fits pivot applications, but note the SDB pivot-block is not available on this adjustable-stroke build. Because the piston drifts on air loss, add an external rod lock or pilot check valve if the load must be held.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ16X75-10STC FAQ
The theoretical maximum force is 20.5 kgf at 1.0 MPa. This 16 mm bore cylinder uses an M5×0.8 air port and a 6 mm piston rod with an M6x1.0 male thread.
An external screw shortens the extend stroke by up to 10 mm (usable range 65-75 mm), while the needle-set air cushion decelerates the piston at both ends to absorb high-speed shock. The -S suffix means it has a built-in magnet for CMSG/DMSG/EMSG sensors. The stop screw and cushion only manage end-of-stroke motion; they do not lock the piston, so you need an external rod lock or pilot check valve to hold a load on air loss.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ16X75-10STC
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.