Airtac MICJ Adjustable Mini Cylinder MICJ16X75-20
The AirTAC MICJ Adjustable Mini Cylinder MICJ16X75-20 is a genuine double acting, double rod, adjustable stroke + cushion round-body mini air cylinder with a Ø16mm bore and 75mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ16 mm
- Stroke75 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke + cushion
- Rod threadM6×1.0
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ16X75-20
Trim the forward stop by up to 20 mm on site without swapping cylinders, and let the needle-set air cushion at both ends soak up high-speed shock. The AirTAC MICJ16X75-20 is a double-acting, round-body stainless-steel mini cylinder that merges on-the-fly extend adjustment with impact control. Its M5×0.8 port and M6x1.0 male rod thread drop into standard ISO 6432 mini-cylinder mounting interfaces.
The stainless barrel and rod resist mild corrosion and washdown. Note this SKU lacks a magnet, so it cannot take CMSG/DMSG/EMSG sensors; order the -S variant if you need position detection.
Airtac MICJ Adjustable Mini Cylinder MICJ16X75-20 Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ16X75-20 |
|---|---|
| Series | MICJ ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 75 mm |
| Acting type | Double acting, double rod, adjustable stroke + cushion |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ16X75-20
| MICJ | ISO 6432 round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 16 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -20 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ16X75-20 Is Used
Gauge Positioning
Dial in the 20 mm extend adjustment to hit a precise 60 N measuring stop without machining custom spacers.
Light Flap Control
Use the adjustable air cushion to soften the 75 mm extend impact when timing lightweight packaging gates.
Lab Dispense Head
Set an exact forward dip height for low-force fluid dispensing, relying on the stainless body for mild washdown resistance.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ16X75-20 the Right Cylinder?
Choose this 16 mm bore when you need fast, settable-position moves within a ~60 N safe load window. The external screw shortens the extend stroke only (usable forward range 55-75 mm); retract remains full.
Mount using LB foot, FA flange, or TC trunnion brackets, plus CA/U/R/CM back covers (SDB pivot-block is not available on this adjustable variant). Remember that the stop screw sets the end position but is not a mid-stroke lock; the cylinder drifts on air loss, so add an external rod lock or pilot check valve for held loads.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ16X75-20 FAQ
An external screw shortens the extend stroke by up to 20 mm on site, while the adjustable air cushion at both ends decelerates the piston near stroke ends. The cushion only absorbs shock and does not lock or hold the load on air loss; this non-magnet SKU also cannot take sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ16X75-20
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.