Airtac MICJ Adjustable Mini Cylinder MICJ16X75-20S
The AirTAC MICJ Adjustable Mini Cylinder MICJ16X75-20S is a genuine double acting, double rod, adjustable stroke + cushion round-body mini air cylinder with a Ø16mm bore and 75mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ16 mm
- Stroke75 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke + cushion
- Rod threadM6×1.0
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ16X75-20S
Dial in a precise forward stop on-site with this 16 mm bore, 75 mm stroke adjustable cylinder. An external screw trims the extend end by up to 20 mm (usable forward travel 55-75 mm), while a needle-set air cushion at both ends soaks up high-speed shock. The stainless steel round-body barrel and rod shrug off mild washdown corrosion, and the built-in magnet (-S) supports CMSG, DMSG and EMSG sensors.
It conforms to ISO 6432 mini-cylinder mounting dimensions for straightforward bracket interchange.
Airtac MICJ Adjustable Mini Cylinder MICJ16X75-20S Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ16X75-20S |
|---|---|
| Series | MICJ ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 75 mm |
| Acting type | Double acting, double rod, adjustable stroke + cushion |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ16X75-20S
| MICJ | ISO 6432 round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 16 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -20 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ16X75-20S Is Used
Light Diverter Gate
Sorting small packets on a line by extending 55-75 mm; the adjustable air cushion absorbs the shock of rapid 800 mm/s deflection moves.
Film Feed Tensioning
Pushing a lightweight guide roller with 100.5 N to maintain packaging film tension, relying on the stainless build to resist humid environments.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ16X75-20S the Right Cylinder?
This Ø16 model hits a sweet spot for compact set-and-forget stops. The external adjuster and dual cushions excel in fast, repetitive moves where you need to tune the impact without swapping hardware.
Remember that the stop screw sets the end position but acts as no mid-stroke lock; the piston will drift on air loss, so fit an external rod lock or pilot check valve for held loads. Use LB, FA or TC mounts (SDB is unavailable here), and select CMSG/DMSG/EMSG switches to leverage the -S magnet.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ16X75-20S FAQ
The theoretical maximum force is 20.5 kgf at 1.0 MPa.
The external screw shortens the extend stroke only by up to 20 mm (retract remains full), letting you set the forward stop on-site. Needle valves adjust the air cushion at both ends to decelerate high-speed impacts. The -S suffix means a piston magnet is built-in for CMSG, DMSG or EMSG sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ16X75-20S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.