Airtac MICJ Adjustable Mini Cylinder MICJ16X75-30
The AirTAC MICJ Adjustable Mini Cylinder MICJ16X75-30 is a genuine double acting, double rod, adjustable stroke + cushion round-body mini air cylinder with a Ø16mm bore and 75mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ16 mm
- Stroke75 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke + cushion
- Rod threadM6×1.0
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ16X75-30
Trim the forward stop by up to 30 mm on site without swapping hardware using this AirTAC round-body mini cylinder. The external screw shortens the extend end position from a 75 mm nominal down to 45 mm, while the retract stroke remains full. An adjustable air cushion at both ends soaks up high-speed shock so you control both the position and the impact.
Built with a stainless-steel barrel and rod for mild washdown resistance, this double-acting unit conforms to the ISO 6432 mounting interface for easy bracket drops. The 16 mm bore uses an M5×0.8 port and a 6 mm rod. Note this SKU lacks a magnet and cannot take CMSG/DMSG/EMSG sensors.
Airtac MICJ Adjustable Mini Cylinder MICJ16X75-30 Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ16X75-30 |
|---|---|
| Series | MICJ ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 75 mm |
| Acting type | Double acting, double rod, adjustable stroke + cushion |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ16X75-30
| MICJ | ISO 6432 round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 16 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -30 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ16X75-30 Is Used
Light Part Ejection
Dial the extend stop in 5 mm increments to eject 4 kg plastic parts from a mold without slamming the end cap, relying on the dual air cushions to absorb the 800 mm/s impact.
Component Sorting
Use the M5×0.8 port and ISO 6432 brackets to mount a divert gate for small electronic components, trimming the extend end to push items gently without scattering them.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ16X75-30 the Right Cylinder?
For lighter moves, the MIJ bumper-only series offers less force; stepping up to the Ø20 MICJ raises push force to 157 N at 0.5 MPa. Choose this Ø16 model when you need precise set-position cycles under 60 N. The adjustable stop screw and needle cushions excel in fast, repetitive moves where you must dial in the exact extend endpoint.
Remember that the stop screw sets the end position but is not a mid-stroke lock; the piston will drift on air loss. Use an external pilot check valve if you must hold a load vertically. Mount via LB foot, FA flange, or TC trunnion (SDB is unavailable on adjustable-stroke types), and select the -S variant if you need position sensing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ16X75-30 FAQ
This 16 mm bore cylinder features an M5×0.8 port and a 6 mm rod. The theoretical maximum force is 20.5 kgf at 1.0 MPa.
An external screw shortens the extend stroke by up to 30 mm (usable range 45-75 mm), while needle valves adjust the air cushions at both ends to decelerate high-speed moves. The cushions only slow the piston near stroke end and do not act as a brake; the cylinder will drift on air loss, so use a pilot check valve for load holding. This non-S SKU lacks a magnet for sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ16X75-30
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.