Airtac MICJ Adjustable Mini Cylinder MICJ16X75-30S
The AirTAC MICJ Adjustable Mini Cylinder MICJ16X75-30S is a genuine double acting, double rod, adjustable stroke + cushion round-body mini air cylinder with a Ø16mm bore and 75mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ16 mm
- Stroke75 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke + cushion
- Rod threadM6×1.0
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ16X75-30S
Trimming the forward stop by up to 30 mm on-site, the AirTAC MICJ16X75-30S lets you fine-tune the extend position from 45 to 75 mm without swapping hardware. This double-acting stainless-steel round-body mini cylinder pairs that external stop screw with an adjustable air cushion at both ends, soaking up high-speed shock so you control both the end location and the impact. The built-in magnet (-S) supports CMSG, DMSG, and EMSG sensors for precise position detection.
The Ø16 mm bore uses an M5×0.8 port and conforms to the ISO 6432 mounting interface for easy bracket interchange. With a Ø6 mm piston rod and M6x1.0 male thread, the stainless barrel and rod resist mild corrosion and washdown environments.
Airtac MICJ Adjustable Mini Cylinder MICJ16X75-30S Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ16X75-30S |
|---|---|
| Series | MICJ ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 75 mm |
| Acting type | Double acting, double rod, adjustable stroke + cushion |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ16X75-30S
| MICJ | ISO 6432 round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 16 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -30 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ16X75-30S Is Used
Gauge Positioning
Dial in the 45-75 mm extend stop to push a measuring gauge onto parts, using the air cushion to soften the 100.5 N impact at high speed.
Light Diverting
Shift small cartons on a conveyor with a safe 60 N working load, relying on the -S magnet and DMSG sensor to confirm the extend position.
Lab Dispensing
Lower a dispensing nozzle precisely using the 30 mm adjuster; the stainless build handles mild washdowns between batches.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ16X75-30S the Right Cylinder?
The MICJ16X75-30S excels in fast set-position applications where the 30 mm extend trim and needle-set cushions prevent end-of-stroke banging. Mount via LB foot, FA flange, or TC trunnion (the SDB pivot-block is not available on this adjustable variant), and use the -S magnet for CMSG/DMSG/EMSG switches. Remember that the stop screw and cushions only decelerate the piston; they do not lock the load. If you need to hold position on air loss, install an external rod lock or pilot check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ16X75-30S FAQ
It features an M5×0.8 air port and a 30-800 mm/s speed range.
An external screw shortens the extend stroke by up to 30 mm on-site, while needle valves adjust the air cushions at both ends to absorb high-speed shock. The cylinder is double-acting, but the cushions and stop screw only decelerate the piston; they do not lock it. The piston will drift on air loss, so use an external rod lock for load holding.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ16X75-30S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.