Airtac MICJ Adjustable Mini Cylinder MICJ16X75-50
The AirTAC MICJ Adjustable Mini Cylinder MICJ16X75-50 is a genuine double acting, double rod, adjustable stroke + cushion round-body mini air cylinder with a Ø16mm bore and 75mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ16 mm
- Stroke75 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke + cushion
- Rod threadM6×1.0
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ16X75-50
Dial in the forward stop on site without swapping cylinders: the MICJ16X75-50 uses an external screw to shorten the extend stroke by up to 50 mm, giving a usable forward range of 25-75 mm. Retract remains full, and a needle-set variable air cushion at both ends soaks up high-speed shock so you control both position and impact.
This double-acting, ISO 6432 mounting-interface mini cylinder features a stainless-steel round barrel and rod for mild washdown resistance. This base SKU lacks a magnet, so it cannot take CMSG/DMSG/EMSG sensors.
Airtac MICJ Adjustable Mini Cylinder MICJ16X75-50 Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ16X75-50 |
|---|---|
| Series | MICJ ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 75 mm |
| Acting type | Double acting, double rod, adjustable stroke + cushion |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ16X75-50
| MICJ | ISO 6432 round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 16 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -50 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ16X75-50 Is Used
Light Part Ejector
Trims the extend stroke by up to 50 mm to eject small plastic parts without overtravel, while the dual air cushions absorb the high-speed impact at the 60 N working load.
Film Feed Stopper
Sets a precise 25-75 mm forward stop for packaging film alignment, relying on the stainless build to resist mild washdown during cleaning.
Component Sorting Gate
Diverts lightweight electronics on a conveyor at 30-800 mm/s, using the adjustable extend stop to dial in the exact gate open distance on site.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ16X75-50 the Right Cylinder?
Size both ways: the larger Ø20 bore pushes 157.0 N at 0.5 MPa if you need more force, while the smaller Ø12 bore in the MIJ series offers only a bumper (no air cushion) for lighter jobs. Choose this Ø16 model when a fast set-position move needs both a trimmed extend stop and shock absorption.
The stop screw sets the end position but is not a mid-stroke lock; the piston drifts on air loss, so add an external rod lock or pilot check valve to hold a load. Mount via LB foot, FA flange or TC trunnion (SDB pivot-block is not available on this adjustable variant).
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ16X75-50 FAQ
It has an M5×0.8 port. At 0.5 MPa it pushes 100.5 N and pulls 86.4 N. At 0.7 MPa it pushes 140.7 N and pulls 120.9 N. The theoretical maximum force is 20.5 kgf at 1.0 MPa.
An external screw shortens the extend end by up to 50 mm (retract is full), while a needle-set variable air cushion at both ends decelerates the piston near stroke end but does not lock it. This SKU has no magnet, so it cannot take CMSG/DMSG/EMSG sensors; you need the -S variant for sensing.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ16X75-50
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.