Airtac MICJ Adjustable Mini Cylinder MICJ16X75-75
The AirTAC MICJ Adjustable Mini Cylinder MICJ16X75-75 is a genuine double acting, double rod, adjustable stroke + cushion round-body mini air cylinder with a Ø16mm bore and 75mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ16 mm
- Stroke75 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke + cushion
- Rod threadM6×1.0
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ16X75-75
Trim the forward stop by up to 75 mm on site with the MICJ16X75-75, a double-acting stainless round-body mini cylinder that pairs an external extend adjuster with a needle-set air cushion at both ends. You dial in the exact extend position without swapping hardware, while the cushions soak up high-speed shock. The M5×0.8 port and M6x1.0 male rod thread drop right into standard ISO 6432 mini-cylinder mounting interfaces.
Built with a stainless-steel barrel and piston rod for mild washdown resistance, this 16 mm bore unit pushes 100.5 N at 0.5 MPa. Note this SKU lacks a magnet, so it cannot host CMSG, DMSG or EMSG sensors.
Airtac MICJ Adjustable Mini Cylinder MICJ16X75-75 Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ16X75-75 |
|---|---|
| Series | MICJ ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 75 mm |
| Acting type | Double acting, double rod, adjustable stroke + cushion |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ16X75-75
| MICJ | ISO 6432 round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 16 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -75 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ16X75-75 Is Used
Flap Tucking
Set a precise forward position for tucking carton flaps at high speed while the dual air cushions absorb the end-of-stroke impact to protect the 5.1 kg load.
Lab Sample Routing
Leverage the stainless build and adjustable 0-75 mm extend window to route lightweight sample trays in wet lab environments without over-traveling.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ16X75-75 the Right Cylinder?
At 16 mm this is the smallest cushioned bore in the line; if you need less force, the smaller sizes use a fixed bumper rather than an air cushion. The 75 mm extend adjuster is ideal for fast set-position moves, but remember the stop screw only sets the end position—it is not a mid-stroke lock. The piston will drift on air loss, so fit an external rod lock or pilot check valve to hold a suspended load. Mount via LB, FA or TC brackets (SDB is not offered here), and choose the -S variant if you need sensing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ16X75-75 FAQ
This 16 mm bore cylinder has an M5×0.8 port. The theoretical maximum force is 20.5 kgf at 1.0 MPa.
An external screw shortens the extend stroke by up to 75 mm on site, while a needle valve adjusts the air cushion at both ends to decelerate high-speed moves. This cylinder has no magnet, so it cannot take sensors. The stop screw is not a mid-stroke lock; the piston drifts on air loss, so use a pilot check valve to hold a load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ16X75-75
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.