Airtac MICJ Adjustable Mini Cylinder MICJ16X80-10
The AirTAC MICJ Adjustable Mini Cylinder MICJ16X80-10 is a genuine double acting, double rod, adjustable stroke + cushion round-body mini air cylinder with a Ø16mm bore and 80mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ16 mm
- Stroke80 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke + cushion
- Rod threadM6×1.0
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ16X80-10
Dial in a precise forward stop on-site with the AirTAC MICJ16X80-10, a stainless-steel round-body mini cylinder that lets you shorten the extend stroke by up to 10 mm via an external screw. The retract stroke remains fixed at its full 80 mm length.
Built with a riveted stainless barrel and a Ø6 mm piston rod, this double-acting unit resists mild corrosion and handles speeds from 30 to 800 mm/s. It uses the ISO 6432 mounting interface for standard mini brackets and features a needle-set variable air cushion at both ends to soak up high-speed shock. This base SKU lacks a magnet and cannot accept position sensors; choose the -S variant for CMSG, DMSG or EMSG switches. The M5×0.8 port ensures reliable airflow for its compact size.
Airtac MICJ Adjustable Mini Cylinder MICJ16X80-10 Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ16X80-10 |
|---|---|
| Series | MICJ ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 80 mm |
| Acting type | Double acting, double rod, adjustable stroke + cushion |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ16X80-10
| MICJ | ISO 6432 round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 16 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ16X80-10 Is Used
Light Carton Feeding
Push lightweight packaging materials at high speed while the adjustable air cushions absorb end-of-stroke shock, preventing bounce and ensuring smooth transfer.
Lab Dispenser Stop
Set a precise fluid dispensing tip depth by adjusting the forward stop on-site, relying on the stainless construction to withstand mild washdowns in laboratory environments.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ16X80-10 the Right Cylinder?
For lighter tasks, the MIJ bumper-only series is the next step down, as the cushioned MICJ line starts at this Ø16 bore. If your application requires more force, stepping up to the Ø20 bore raises the 0.5 MPa push force to 157 N. The MICJ16X80-10 shines in fast set-position moves where you need to trim the extend end without swapping cylinders, while the adjustable air cushions manage impact at high velocities.
Keep in mind the stop screw sets the end position but is not a mid-stroke lock; the piston will drift on air loss, and the cushion only decelerates near the stroke end. For held loads, install an external rod lock or pilot-operated check valve. Mount this cylinder using LB foot, FA flange or TC trunnion brackets (SDB pivot-block is not available), and note that a male M6x1.0 rod thread is standard.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ16X80-10 FAQ
At 0.5 MPa, the push force is 100.5 N and the pull force is 86.4 N. At 0.7 MPa, push is 140.7 N and pull is 120.9 N. The theoretical maximum force is 20.5 kgf at 1.0 MPa. This Ø16 bore model uses an M5×0.8 air port and a Ø6 mm piston rod.
An external screw shortens the extend stroke by up to 10 mm on-site, while the retract stroke remains fixed. Needle-set variable air cushions at both ends absorb high-speed shock. The cushion only decelerates near the stroke end and is not a brake; the cylinder cannot hold a load on air loss and will drift. This non-S SKU lacks a magnet and cannot take sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ16X80-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.