Airtac MICJ Adjustable Mini Cylinder MICJ16X80-10S
The AirTAC MICJ Adjustable Mini Cylinder MICJ16X80-10S is a genuine double acting, double rod, adjustable stroke + cushion round-body mini air cylinder with a Ø16mm bore and 80mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ16 mm
- Stroke80 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke + cushion
- Rod threadM6×1.0
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ16X80-10S
Dial in a precise forward stop on-site with the AirTAC MICJ16X80-10S, a stainless-steel round-body mini cylinder featuring an external screw that shortens the extend stroke by up to 10 mm (usable forward range 70-80 mm). The adjustable air cushion at both ends soaks up high-speed shock, letting you set the exact end position while controlling impact.
Built with a mildly corrosion-resistant stainless barrel and rod, it handles washdown environments and conforms to the ISO 6432 mounting interface for straightforward bracket drops. The built-in magnet (-S) supports CMSG, DMSG, and EMSG sensors for position confirmation.
Airtac MICJ Adjustable Mini Cylinder MICJ16X80-10S Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ16X80-10S |
|---|---|
| Series | MICJ ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 80 mm |
| Acting type | Double acting, double rod, adjustable stroke + cushion |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ16X80-10S
| MICJ | ISO 6432 round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 16 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ16X80-10S Is Used
Micro-Clamp Tuning
Fine-tune the 10 mm extend stop to seat a delicate 5 kg workpiece without crushing, while the end cushion absorbs the impact of the rapid 80 mm forward move.
Film Feed Tensioning
Set a precise forward stroke to maintain packaging film tension, using the needle cushion to prevent bounce at high cycling speeds.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ16X80-10S the Right Cylinder?
For lighter duties, the MIJ bumper-only series lacks this needle cushion, making the MICJ16 your starting point for fast, settable-position moves requiring shock absorption. The 10 mm extend adjuster is ideal for tuning a forward stop without swapping hardware, but remember it only trims the extend end and acts as an end-position setter, not a mid-stroke lock.
This SKU includes the -S magnet for CMSG/DMSG/EMSG switches. You can use LB foot, FA flange, or TC trunnion mounts, plus CA/U/R/CM back covers, but the SDB pivot block is not available on this adjustable variant. Because a standard cylinder drifts on air loss, add an external rod lock or pilot check valve if you need to hold a suspended load.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ16X80-10S FAQ
The theoretical maximum force is 20.5 kgf at 1.0 MPa.
An external screw shortens the extend stroke by up to 10 mm, while a needle valve adjusts the air cushion at both ends to decelerate the piston near stroke end. The -S suffix means it has a magnet for CMSG/DMSG/EMSG sensors. The stop screw is not a mid-stroke lock, and the cylinder will drift on air loss, so use an external rod lock for suspended loads.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ16X80-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.