Airtac MICJ Adjustable Mini Cylinder MICJ16X90-10S
The AirTAC MICJ Adjustable Mini Cylinder MICJ16X90-10S is a genuine double acting, double rod, adjustable stroke + cushion round-body mini air cylinder with a Ø16mm bore and 90mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ16 mm
- Stroke90 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke + cushion
- Rod threadM6×1.0
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ16X90-10S
Dial in a precise forward stop on-site with the AirTAC MICJ16X90-10S, a 16mm bore round-body mini cylinder that lets you shorten the extend stroke by up to 10mm via an external screw. The built-in magnet enables position sensing, while adjustable air cushions at both ends soak up high-speed shock for smooth 30-800mm/s operation.
Built with a stainless-steel barrel and rod for mild washdown resistance, this double-acting actuator conforms to the ISO 6432 mounting interface. The M5×0.8 port and M6x1.0 male rod thread ensure straightforward integration.
Airtac MICJ Adjustable Mini Cylinder MICJ16X90-10S Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ16X90-10S |
|---|---|
| Series | MICJ ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 90 mm |
| Acting type | Double acting, double rod, adjustable stroke + cushion |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ16X90-10S
| MICJ | ISO 6432 round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 16 | Bore size in mm. |
| ×90 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ16X90-10S Is Used
Micro-Clamp Positioning
Dial in the exact 80-90mm extend reach for clamping small electronic components, using the 10mm stop screw to fine-tune the jaw distance without swapping hardware.
Light-Diverter Gate
Actuate a lightweight routing flap at high speed; the dual adjustable air cushions absorb the end-of-stroke impact to keep the 60N working load stable over thousands of cycles.
Thin-Film Pusher
Push delicate packaging film or labels into position using the 5.1kg vertical lift capacity, relying on the CMSG sensor to confirm the precise extend endpoint.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ16X90-10S the Right Cylinder?
If your application needs more power, stepping up to the 20mm bore increases push force to 157N. The adjustable extend stop is ideal for fast set-position moves, but remember it only trims the forward end; it is not a mid-stroke lock, so add an external rod lock or pilot check valve to hold a suspended load.
Mounting options include LB foot, FA flange, and TC trunnion brackets, as the SDB pivot block is not available on this adjustable variant. Because this SKU includes the -S magnet, you can directly mount CMSG, DMSG, or EMSG sensors for precise end-of-stroke detection.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ16X90-10S FAQ
This 16mm bore cylinder features an M5×0.8 air port and an M6x1.0 male rod thread.
An external screw shortens the extend stroke by up to 10mm on-site, while needle valves adjust the air cushions at both ends to decelerate the piston before impact. The -S magnet allows CMSG/DMSG/EMSG sensors to track position, but the cylinder does not hold a load on air loss; use an external rod lock for that.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ16X90-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.