Airtac MICJ Adjustable Mini Cylinder MICJ40X100-100
The AirTAC MICJ Adjustable Mini Cylinder MICJ40X100-100 is a genuine double acting, double rod, adjustable stroke + cushion round-body mini air cylinder with a Ø40mm bore and 100mm stroke, 1/4" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ40 mm
- Stroke100 mm
- Port size1/4"
- Acting typeDouble acting, double rod, adjustable stroke + cushion
- Rod threadM12×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ40X100-100
Trim the forward stop by up to 100 mm on site without swapping cylinders using the AirTAC MICJ40X100-100. This double-acting round-body mini cylinder pairs that adjustable extend stroke with a needle-set variable air cushion at both ends to soak up high-speed shock, letting you dial in the exact position and control the impact.
Built with a stainless-steel barrel and piston rod, the riveted construction resists mild corrosion and handles washdown environments. Note that this SKU lacks a magnet and cannot host CMSG, DMSG or EMSG sensors.
Airtac MICJ Adjustable Mini Cylinder MICJ40X100-100 Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ40X100-100 |
|---|---|
| Series | MICJ mini cylinder |
| Bore size | Ø40 mm |
| Stroke | 100 mm |
| Acting type | Double acting, double rod, adjustable stroke + cushion |
| Port size | 1/4" |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø40 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø40mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 528 N |
| 0.7 MPa | 739 N |
| Max (@1.0 MPa) | 108 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ40X100-100
| MICJ | round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 40 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -100 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ40X100-100 Is Used
Heavy Clamping Press
Dial in the 100 mm extend stop to clamp 32 kg workpieces securely, relying on the dual air cushions to absorb the high-speed impact at the end of travel.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ40X100-100 the Right Cylinder?
When sizing this 40 mm bore, stepping down to the Ø32 model drops the 0.5 MPa push force to 402.2 N, while no larger MICJ bore exists above it. The external stop screw and dual air cushions shine in fast set-position moves where you must precisely trim the extend end and decelerate smoothly without slamming. Remember the stop screw only sets the forward end position—it is not a mid-stroke lock, and the piston will drift on air loss, so add an external rod lock or pilot check valve for held loads. Mount via LB foot, FA flange or TC trunnion (SDB pivot-block is unavailable here), and choose the -S variant if you need sensing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ40X100-100 FAQ
This 40 mm bore cylinder uses a 1/4" port.
An external screw shortens the extend stroke by up to 100 mm on site, while a needle valve adjusts the variable air cushion at both ends to decelerate high-speed moves. The cylinder does not hold position on air loss and the screw is not a mid-stroke lock; use an external rod lock for holding. This non-magnet SKU cannot take sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ40X100-100
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.