Airtac MICJ Adjustable Mini Cylinder MICJ40X100-50
The AirTAC MICJ Adjustable Mini Cylinder MICJ40X100-50 is a genuine double acting, double rod, adjustable stroke + cushion round-body mini air cylinder with a Ø40mm bore and 100mm stroke, 1/4" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ40 mm
- Stroke100 mm
- Port size1/4"
- Acting typeDouble acting, double rod, adjustable stroke + cushion
- Rod threadM12×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ40X100-50
Trim the forward stop by up to 50 mm on site without swapping cylinders using the AirTAC MICJ40X100-50. This double-acting round-body mini cylinder pairs that external extend adjuster with a needle-set variable air cushion at both ends, letting you set the exact end position and soak up high-speed shock simultaneously.
Built with a stainless-steel barrel and Ø16 piston rod (M12x1.25 male thread), it resists mild corrosion and handles washdowns. It uses a 1/4" port and operates at 30-800 mm/s. Note this non-magnet SKU cannot take a sensor; the -S variant is required for CMSG/DMSG/EMSG switches.
Airtac MICJ Adjustable Mini Cylinder MICJ40X100-50 Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ40X100-50 |
|---|---|
| Series | MICJ mini cylinder |
| Bore size | Ø40 mm |
| Stroke | 100 mm |
| Acting type | Double acting, double rod, adjustable stroke + cushion |
| Port size | 1/4" |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø40 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø40mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 528 N |
| 0.7 MPa | 739 N |
| Max (@1.0 MPa) | 108 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ40X100-50
| MICJ | round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 40 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -50 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ40X100-50 Is Used
High-Speed Diverting
Uses the adjustable air cushion to absorb shock during fast 30-800 mm/s diverting motions, preventing end-cap impact on heavy product lanes.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ40X100-50 the Right Cylinder?
When sizing, the smaller Ø32 bore pushes 402.2 N at 0.5 MPa, while there is no larger MICJ option above Ø40. This 628.3 N model fits applications needing substantial force where you also need to dial in a precise extend position on the fly. The external screw shortens the extend end only; retract remains the full 100 mm.
The adjustable air cushion decelerates the load near the stroke end but does not function as a mid-stroke lock or brake. If the machine loses air, the piston will drift; use an external rod lock or pilot-operated check valve for held loads. Mount via LB foot, FA flange, or TC trunnion (SDB pivot-block is not available on this adjustable variant).
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ40X100-50 FAQ
This Ø40 bore cylinder uses a 1/4" port.
An external screw shortens the extend stroke by up to 50 mm on site, while a needle valve adjusts the air cushion at both ends to decelerate high-speed moves. The cushion is not a brake, and the cylinder will drift on air loss; use a pilot check valve for load holding. This non-S SKU cannot take a sensor.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ40X100-50
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.