Airtac MICJ Adjustable Mini Cylinder MICJ40X100-50S
The AirTAC MICJ Adjustable Mini Cylinder MICJ40X100-50S is a genuine double acting, double rod, adjustable stroke + cushion round-body mini air cylinder with a Ø40mm bore and 100mm stroke, 1/4" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ40 mm
- Stroke100 mm
- Port size1/4"
- Acting typeDouble acting, double rod, adjustable stroke + cushion
- Rod threadM12×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ40X100-50S
Dial in the forward stop on-site without swapping cylinders: the MICJ40X100-50S uses an external screw to shorten the extend stroke by up to 50 mm, giving a usable forward range of 50-100 mm while retract remains full. The stainless-steel round-body barrel and Ø16 mm rod shrug off mild washdown corrosion, and the built-in magnet (-S) supports CMSG, DMSG, or EMSG sensors for position detection.
Needle-set adjustable air cushions at both ends soak up high-speed shock (30-800 mm/s) to protect your tooling. The 1/4" port feeds the bore efficiently, and the stop screw sets the end position but is not a mid-stroke lock.
Airtac MICJ Adjustable Mini Cylinder MICJ40X100-50S Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ40X100-50S |
|---|---|
| Series | MICJ mini cylinder |
| Bore size | Ø40 mm |
| Stroke | 100 mm |
| Acting type | Double acting, double rod, adjustable stroke + cushion |
| Port size | 1/4" |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø40 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø40mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 528 N |
| 0.7 MPa | 739 N |
| Max (@1.0 MPa) | 108 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ40X100-50S
| MICJ | round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 40 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -50 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ40X100-50S Is Used
Heavy Diverter Gate
Shifts heavy packages on a sorting line, using the 50 mm extend adjustment to fine-tune the gate angle without moving brackets, while the air cushion absorbs the 628.3 N impact at high speed.
Press Pin Insertion
Drives a pin into a housing with 377 N of safe working force, relying on the adjustable forward stop to set precise insertion depth and the -S magnet to confirm stroke completion.
Large Carton Flap Folder
Folds heavy cardboard flaps on oversized cartons, dialing the extend stroke back 50 mm to clear varying box heights while the stainless construction resists damp environments.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ40X100-50S the Right Cylinder?
Choose this model when you need high force combined with on-site extend tuning and high-speed cushioning.
The adjustable stop and dual air cushions excel in fast, settable-position moves, but note that a plain cylinder drifts on air loss—the cushion only decelerates near the end and does not act as a brake. For load holding, add an external rod lock or pilot check valve. Mount using LB foot, FA flange, or TC trunnion (SDB pivot-block is not offered on this variant), and leverage the -S magnet for electronic or reed switches.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ40X100-50S FAQ
This Ø40 mm cylinder has a 1/4" port and M12x1.25 male rod thread.
An external screw shortens the extend stroke by up to 50 mm (retract is unaffected), while needle-set air cushions at both ends decelerate the piston near stroke ends. The -S magnet enables position sensing. The cylinder does not hold position on air loss; use an external rod lock for that.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ40X100-50S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.