Airtac MICJ Adjustable Mini Cylinder MICJ40X100-75
The AirTAC MICJ Adjustable Mini Cylinder MICJ40X100-75 is a genuine double acting, double rod, adjustable stroke + cushion round-body mini air cylinder with a Ø40mm bore and 100mm stroke, 1/4" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ40 mm
- Stroke100 mm
- Port size1/4"
- Acting typeDouble acting, double rod, adjustable stroke + cushion
- Rod threadM12×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ40X100-75
Dial in a precise forward stop on-site with the AirTAC MICJ40X100-75, a round-body stainless-steel mini cylinder built for double-acting service. An external screw trims the extend end position by up to 75 mm (giving a usable 25-100 mm forward travel), while a needle-set air cushion at both ends absorbs high-speed shock.
This riveted stainless construction shrugs off mild corrosion and washdown environments. Note this non-magnet SKU cannot host CMSG/DMSG/EMSG sensors.
Airtac MICJ Adjustable Mini Cylinder MICJ40X100-75 Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ40X100-75 |
|---|---|
| Series | MICJ mini cylinder |
| Bore size | Ø40 mm |
| Stroke | 100 mm |
| Acting type | Double acting, double rod, adjustable stroke + cushion |
| Port size | 1/4" |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø40 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø40mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 528 N |
| 0.7 MPa | 739 N |
| Max (@1.0 MPa) | 108 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ40X100-75
| MICJ | round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 40 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -75 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ40X100-75 Is Used
Heavy Carton Diverting
Pushes heavy palletized cartons at 800 mm/s on a packaging line, using the 75 mm extend trim to dial the exact push distance while the dual air cushions prevent end-of-stroke slamming.
Press Pin Seating
Seats solid metal pins with 628.3 N of 0.5 MPa push force, relying on the adjustable forward stop to set the precise 40 mm insertion depth without swapping physical spacers.
Vertical Lift Gate
Raises a 30 kg material lift gate safely under the 32 kg vertical lift margin, using the needle cushion to soften the high-speed arrival at the top extend position.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ40X100-75 the Right Cylinder?
When sizing this 40 mm bore, compare it directly against the adjacent options. Stepping down to the 32 mm bore drops your 0.5 MPa push force to 402.2 N, whereas this 40 mm unit delivers 628.3 N; there is no larger standard MICJ bore available. Choose this model when you need substantial push power combined with on-the-fly extend shortening and high-speed cushioning.
Remember that the stop screw sets the end position but acts purely as a forward stop, not a mid-stroke lock. The piston will drift on air loss, so add an external rod lock or pilot check valve for suspended loads. Mount using LB foot, FA flange or TC trunnion (SDB pivot-block is unavailable), and select the -S magnet variant if position sensing is required.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ40X100-75 FAQ
This 40 mm bore cylinder features a 1/4" port and a 16 mm rod.
An external screw shortens the extend stroke by up to 75 mm, while the needle-set air cushion decelerates the piston near stroke ends at speeds up to 800 mm/s. The cushion only slows travel and does not lock the piston; on air loss the cylinder drifts, so use an external rod lock to hold a load. This SKU lacks a magnet, so it cannot take sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ40X100-75
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.