Airtac MICJ Adjustable Mini Cylinder MICJ40X150-40
The AirTAC MICJ Adjustable Mini Cylinder MICJ40X150-40 is a genuine double acting, double rod, adjustable stroke + cushion round-body mini air cylinder with a Ø40mm bore and 150mm stroke, 1/4" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ40 mm
- Stroke150 mm
- Port size1/4"
- Acting typeDouble acting, double rod, adjustable stroke + cushion
- Rod threadM12×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ40X150-40
Dial in the forward stop on-site without swapping cylinders using the AirTAC MICJ40X150-40. This round-body stainless-steel mini cylinder features an external screw that shortens the extend stroke by up to 40 mm, giving a usable forward range of 110-150 mm, while a needle-set adjustable air cushion at both ends soaks up high-speed shock. As a double-acting unit, it delivers substantial power, pushing with 628.3 N and pulling with 527.8 N at 0.5 MPa. The stainless barrel and rod resist mild corrosion and washdown environments.
Driven by a 1/4" air port and a 16 mm piston rod with an M12x1.25 male thread, this Ø40 model operates at speeds from 30-800 mm/s. Note that this specific SKU lacks a magnet and therefore cannot support CMSG, DMSG, or EMSG sensors; you would need the -S variant for position detection. Being a larger bore, it is a non-ISO-6432 round-body unit.
Airtac MICJ Adjustable Mini Cylinder MICJ40X150-40 Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ40X150-40 |
|---|---|
| Series | MICJ mini cylinder |
| Bore size | Ø40 mm |
| Stroke | 150 mm |
| Acting type | Double acting, double rod, adjustable stroke + cushion |
| Port size | 1/4" |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø40 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø40mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 528 N |
| 0.7 MPa | 739 N |
| Max (@1.0 MPa) | 108 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ40X150-40
| MICJ | round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 40 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -40 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ40X150-40 Is Used
High-Speed Divertor
Leverages the dual adjustable air cushions to decelerate the 150 mm stroke smoothly at high speeds, preventing impact damage when shifting heavy goods.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ40X150-40 the Right Cylinder?
When sizing this 40 mm bore, stepping down to a Ø32 MICJ drops the 0.5 MPa push force to 402.2 N, whereas this model provides 628.3 N. There is no larger bore in the MICJ range, making this the top choice for heavy mini-cylinder tasks. The adjustable forward stop and dual air cushions excel in fast set-position moves where you must precisely trim the extend end and control impact without changing the physical cylinder length.
Keep in mind the external screw sets the end position but acts purely as a stop, not a mid-stroke lock. The cylinder will drift and cannot hold a load on air loss, so incorporate an external rod lock or pilot-operated check valve for suspended loads. For mounting, utilize LB foot, FA flange, or TC trunnion brackets, along with CA, U, R, or CM back covers. The SDB pivot-block is not available on this adjustable-stroke variant.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ40X150-40 FAQ
At 0.7 MPa, the push increases to 879.6 N and the pull to 738.9 N. The theoretical maximum force is 128.1 kgf at 1.0 MPa.
An external screw shortens the extend stroke by up to 40 mm on-site, while the needle-set adjustable air cushion at both ends decelerates the piston near the stroke ends to absorb shock. This SKU has no magnet and cannot take a sensor. The cushion only decelerates and does not lock; the piston will drift on air loss, so use an external rod lock for holding.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ40X150-40
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.