Airtac MICJ Adjustable Mini Cylinder MICJ40X150-40S
The AirTAC MICJ Adjustable Mini Cylinder MICJ40X150-40S is a genuine double acting, double rod, adjustable stroke + cushion round-body mini air cylinder with a Ø40mm bore and 150mm stroke, 1/4" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ40 mm
- Stroke150 mm
- Port size1/4"
- Acting typeDouble acting, double rod, adjustable stroke + cushion
- Rod threadM12×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ40X150-40S
Dial in the forward stop on-site without swapping cylinders: this stainless round-body mini cylinder shortens the extend end by up to 40 mm via an external screw, giving a usable forward range of 110-150 mm while retract stays full. The adjustable air cushion at both ends soaks up high-speed shock so you set the position and control the impact.
Built with a stainless barrel and rod for mild washdown resistance, the 40 mm bore runs on a 1/4" port with a 16 mm rod. The -S suffix means a piston magnet is installed for CMSG, DMSG or EMSG sensors.
Airtac MICJ Adjustable Mini Cylinder MICJ40X150-40S Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ40X150-40S |
|---|---|
| Series | MICJ mini cylinder |
| Bore size | Ø40 mm |
| Stroke | 150 mm |
| Acting type | Double acting, double rod, adjustable stroke + cushion |
| Port size | 1/4" |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø40 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø40mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 528 N |
| 0.7 MPa | 739 N |
| Max (@1.0 MPa) | 108 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ40X150-40S
| MICJ | round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 40 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -40 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ40X150-40S Is Used
Product Diverting
Snaps a diverter arm out to a precise 120 mm stop on a high-speed line, using the cushion to absorb the impact of heavy cartons.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ40X150-40S the Right Cylinder?
The adjustable stop plus needle cushion shines in fast set-position moves, but note the cylinder does not hold position on air loss—the piston drifts. Use an external rod lock or pilot check valve for held loads.
Mount using LB foot, FA flange or TC trunnion (the SDB pivot-block is not offered on this adjustable variant). Back covers include CA, U, R and CM. The stop screw sets the end position but is not a mid-stroke lock, and the cushion only decelerates near the end.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ40X150-40S FAQ
It uses a 1/4" port. At 0.5 MPa it pushes 628.3 N and pulls 527.8 N. At 0.7 MPa it pushes 879.6 N and pulls 738.9 N. The theoretical max force is 128.1 kgf at 1.0 MPa.
An external screw shortens the extend stroke by up to 40 mm (retract is full), and a needle valve adjusts the air cushion at both ends to decelerate high-speed moves. The -S magnet enables CMSG/DMSG/EMSG sensors. It does not hold load on air loss; use an external rod lock for that.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ40X150-40S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.