Airtac MICJ Adjustable Mini Cylinder MICJ40X160-10
The AirTAC MICJ Adjustable Mini Cylinder MICJ40X160-10 is a genuine double acting, double rod, adjustable stroke + cushion round-body mini air cylinder with a Ø40mm bore and 160mm stroke, 1/4" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ40 mm
- Stroke160 mm
- Port size1/4"
- Acting typeDouble acting, double rod, adjustable stroke + cushion
- Rod threadM12×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ40X160-10
Trim the forward stop by up to 10 mm on site without swapping hardware using the AirTAC MICJ40X160-10. This 40 mm bore, 160 mm stroke round-body mini cylinder pairs that external extend adjuster with a needle-set variable air cushion at both ends to soak up high-speed shock.
Note this non-ISO-6432 SKU lacks a magnet, so it cannot host CMSG/DMSG/EMSG sensors.
Airtac MICJ Adjustable Mini Cylinder MICJ40X160-10 Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ40X160-10 |
|---|---|
| Series | MICJ mini cylinder |
| Bore size | Ø40 mm |
| Stroke | 160 mm |
| Acting type | Double acting, double rod, adjustable stroke + cushion |
| Port size | 1/4" |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø40 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø40mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 528 N |
| 0.7 MPa | 739 N |
| Max (@1.0 MPa) | 108 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ40X160-10
| MICJ | round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 40 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ40X160-10 Is Used
Carton Flap Folder
Folds heavy corrugated flaps rapidly, using the dual adjustable air cushions to absorb the 800 mm/s impact before the end of the 160 mm stroke.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ40X160-10 the Right Cylinder?
When sizing this 40 mm bore, dropping to the MICJ32 lowers the 0.5 MPa push force to 402.2 N, while no larger MICJ bore exists for an upgrade. Choose this 160 mm stroke unit when you need a fast, settable extend position between 150 mm and 160 mm, letting the 10 mm stop screw dial in the exact forward impact point while the dual air cushions decelerate the load.
The stop screw and cushion only manage end-of-stroke energy; they do not lock the piston mid-stroke or hold a load on air loss. For suspended loads, add an external rod lock or pilot check valve. Mount via LB foot, FA flange, or TC trunnion (SDB pivot-block is unavailable here), and select the -S variant if you need position sensing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ40X160-10 FAQ
This 40 mm bore cylinder features a 1/4" air port and a male M12x1.25 rod thread.
An external screw shortens the extend stroke by up to 10 mm, while needle valves tune the variable air cushion at both ends to decelerate high-speed moves. This stainless round-body cylinder does not hold position on air loss, and because this specific SKU lacks a magnet (-S), it cannot mount position sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ40X160-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.