Airtac MICJ Adjustable Mini Cylinder MICJ40X175-10
The AirTAC MICJ Adjustable Mini Cylinder MICJ40X175-10 is a genuine double acting, double rod, adjustable stroke + cushion round-body mini air cylinder with a Ø40mm bore and 175mm stroke, 1/4" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ40 mm
- Stroke175 mm
- Port size1/4"
- Acting typeDouble acting, double rod, adjustable stroke + cushion
- Rod threadM12×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ40X175-10
Dialing in a precise forward stop on-site is effortless with this stainless-steel round-body mini cylinder, thanks to an external screw that trims the extend stroke by up to 10 mm (usable range 165-175 mm). The MICJ40X175-10 is a double-acting actuator featuring a 1/4" port, a Ø16 mm piston rod with an M12x1.25 male thread, and a needle-set adjustable air cushion at both ends to absorb high-speed shock without bouncing.
Note this non-magnetic SKU cannot host CMSG/DMSG/EMSG sensors; the -S variant is required for position detection.
Airtac MICJ Adjustable Mini Cylinder MICJ40X175-10 Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ40X175-10 |
|---|---|
| Series | MICJ mini cylinder |
| Bore size | Ø40 mm |
| Stroke | 175 mm |
| Acting type | Double acting, double rod, adjustable stroke + cushion |
| Port size | 1/4" |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø40 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø40mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 528 N |
| 0.7 MPa | 739 N |
| Max (@1.0 MPa) | 108 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ40X175-10
| MICJ | round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 40 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ40X175-10 Is Used
Heavy Carton Diverting
Pushes heavy packaged goods at high speed onto a secondary line, using the 10 mm extend adjustment to avoid crushing the cartons while the air cushion decelerates the 628.3 N impact.
Filler Head Positioning
Sets the precise down-stroke end position for a liquid filler head on varying bottle heights, relying on the stainless construction for washdown resistance and the cushion to soften the stop.
Pallet Stopper Gate
Acts as a high-force stop gate for incoming pallets, trimming the extend stroke by 10 mm to align perfectly with the conveyor edge while absorbing the shock of heavy loads.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ40X175-10 the Right Cylinder?
When sizing this 40 mm bore against the rest of the range, dropping down to a Ø32 mm bore cuts the 0.5 MPa push force to 402.2 N, while the Ø40 stands as the largest available bore in this series with no larger option. Choose this model when you need substantial thrust combined with on-the-fly extend tuning and high-speed shock absorption via the dual adjustable air cushions.
Keep in mind the stop screw sets the end position but does not function as a mid-stroke lock, and the cylinder will drift if air pressure is lost—use an external rod lock or pilot check valve for strict load holding. Mounting options include LB foot, FA flange, and TC trunnion (the SDB pivot-block is not offered on this adjustable variant), operating at speeds of 30-800 mm/s.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ40X175-10 FAQ
The theoretical maximum force is 128.1 kgf at 1.0 MPa.
An external screw shortens the extend stroke by up to 10 mm, while a needle valve adjusts the air cushion at both ends to decelerate the piston before impact. The cushion only softens the stop and does not lock the piston; for load holding on air loss, you need an external rod lock or pilot check valve. This non-S SKU also cannot mount magnetic sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ40X175-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.