Airtac MICJ Adjustable Mini Cylinder MICJ40X175-10S
The AirTAC MICJ Adjustable Mini Cylinder MICJ40X175-10S is a genuine double acting, double rod, adjustable stroke + cushion round-body mini air cylinder with a Ø40mm bore and 175mm stroke, 1/4" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ40 mm
- Stroke175 mm
- Port size1/4"
- Acting typeDouble acting, double rod, adjustable stroke + cushion
- Rod threadM12×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ40X175-10S
Trim the forward stop by up to 10 mm on site without swapping hardware using the AirTAC MICJ40X175-10S. This 40 mm round-body mini cylinder pairs that external extend adjuster with a needle-set variable air cushion at both ends, letting you dial in the exact end position while soaking up high-speed shock.
The built-in magnet (-S) supports CMSG, DMSG, and EMSG sensors, and the 1/4" port handles the air flow for this non-ISO 6432 size.
Airtac MICJ Adjustable Mini Cylinder MICJ40X175-10S Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ40X175-10S |
|---|---|
| Series | MICJ mini cylinder |
| Bore size | Ø40 mm |
| Stroke | 175 mm |
| Acting type | Double acting, double rod, adjustable stroke + cushion |
| Port size | 1/4" |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø40 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø40mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 528 N |
| 0.7 MPa | 739 N |
| Max (@1.0 MPa) | 108 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ40X175-10S
| MICJ | round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 40 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ40X175-10S Is Used
Heavy Part Clamping
Secure heavier workpieces during machining, using the 10 mm extend adjustment to dial in the exact clamping depth and the dual air cushions to absorb the impact of rapid 628.3 N moves.
Pallet Deceleration
Stop loaded pallets on a high-speed line by tuning the needle cushion to bring the 32 kg working load to a smooth halt without slamming at the end of the 175 mm stroke.
Vertical Lifting
Raise and lower components in a washdown-friendly stainless build, adjusting the forward stop to hit a precise tier while relying on the double-acting force for stable vertical lift.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ40X175-10S the Right Cylinder?
When sizing this 40 mm bore against the rest of the line, dropping down to the 32 mm bore cuts the 0.5 MPa push force to 402.2 N, while the 40 mm is the largest available option in this series at 628.3 N. The adjustable extend stop and dual air cushions shine in fast set-position moves where you need to tune out impact shock without re-engineering the setup.
Remember that the stop screw only sets the end position and the cushion only decelerates near stroke end—neither acts as a mid-stroke lock. If the application must hold a load on air loss, add an external rod lock or pilot-operated check valve. For mounting, use LB, FA, or TC attachments (SDB is not offered here), and rely on the -S magnet for position sensing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ40X175-10S FAQ
This 40 mm bore double-acting cylinder pushes with 628.3 N and pulls with 527.8 N at 0.5 MPa. At 0.7 MPa, push is 879.6 N and pull is 738.9 N. The theoretical maximum force is 128.1 kgf at 1.0 MPa, and it uses a 1/4" air port.
An external stop screw shortens the extend stroke by up to 10 mm on site, giving a usable forward range of 165-175 mm, while retract remains full. A needle-set variable air cushion at both ends decelerates the piston near stroke end to absorb high-speed shock. The -S magnet enables CMSG, DMSG, or EMSG sensors, but neither the screw nor the cushion acts as a mid-stroke lock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ40X175-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.