Airtac MICJ Adjustable Mini Cylinder MICJ40X175-30S
The AirTAC MICJ Adjustable Mini Cylinder MICJ40X175-30S is a genuine double acting, double rod, adjustable stroke + cushion round-body mini air cylinder with a Ø40mm bore and 175mm stroke, 1/4" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ40 mm
- Stroke175 mm
- Port size1/4"
- Acting typeDouble acting, double rod, adjustable stroke + cushion
- Rod threadM12×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ40X175-30S
Dial in the forward stop on-site without swapping actuators using the AirTAC MICJ40X175-30S. This round-body stainless-steel mini cylinder features an external screw that shortens the extend end position by up to 30 mm, giving a usable forward range of 145-175 mm. The retract stroke remains full length. A needle-set variable air cushion at both ends soaks up high-speed shock, letting you set the position and control the impact simultaneously.
The built-in magnet (-S) supports CMSG, DMSG, and EMSG sensors, and the 1/4" port handles the air volume needed for this larger bore.
Airtac MICJ Adjustable Mini Cylinder MICJ40X175-30S Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ40X175-30S |
|---|---|
| Series | MICJ mini cylinder |
| Bore size | Ø40 mm |
| Stroke | 175 mm |
| Acting type | Double acting, double rod, adjustable stroke + cushion |
| Port size | 1/4" |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø40 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø40mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 528 N |
| 0.7 MPa | 739 N |
| Max (@1.0 MPa) | 108 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ40X175-30S
| MICJ | round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 40 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -30 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ40X175-30S Is Used
Pallet Stopper Adjustment
Act as an adjustable end-stop for pallets entering a wrapper, using the needle air cushion to absorb the impact of fast-moving loads.
Washdown Clamping
Secure stainless parts in a food-grade washdown environment, relying on the corrosion-resistant barrel and 32 kg vertical lift capacity.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ40X175-30S the Right Cylinder?
When sizing this 40 mm bore actuator, compare it against the adjacent bores. Stepping down to the 32 mm variant drops the 0.5 MPa push force to 402.2 N, while the 40 mm bore used here provides 628.3 N. There is no larger standard MICJ bore available, making this the top choice for maximum thrust in the series. The 30 mm extend stop adjustment is ideal for fast set-position moves where you need to tune the forward endpoint on the fly.
Mounting options include LB foot, FA flange, and TC trunnion brackets, but the SDB pivot-block is not available on this adjustable-stroke variant. Remember that the stop screw and air cushion only decelerate the piston near the stroke end; they do not function as a mid-stroke lock. If your application must hold a load on air loss, install an external rod lock or pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ40X175-30S FAQ
At 0.7 MPa, push is 879.6 N and pull is 738.9 N. The theoretical maximum force is 128.1 kgf at 1.0 MPa. It uses a 1/4" air port.
An external screw shortens the extend stroke by up to 30 mm on-site, giving a usable forward range of 145-175 mm, while the retract stroke remains full. A needle-set variable air cushion at both ends decelerates the piston near the ends to absorb high-speed shock. The -S suffix means it includes a magnet for CMSG, DMSG, or EMSG sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ40X175-30S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.