Airtac MICJ Adjustable Mini Cylinder MICJ40X200-50S
The AirTAC MICJ Adjustable Mini Cylinder MICJ40X200-50S is a genuine double acting, double rod, adjustable stroke + cushion round-body mini air cylinder with a Ø40mm bore and 200mm stroke, 1/4" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ40 mm
- Stroke200 mm
- Port size1/4"
- Acting typeDouble acting, double rod, adjustable stroke + cushion
- Rod threadM12×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ40X200-50S
Dial in a precise forward stop without swapping hardware using the AirTAC MICJ40X200-50S. An external stop screw shortens the extend stroke by up to 50 mm on site, giving a usable forward range of 150-200 mm, while a needle-set variable air cushion at both ends soaks up high-speed shock. Built as a double-acting, round-body stainless steel mini cylinder, the Ø40 bore pushes 628.3 N and pulls 527.8 N at 0.5 MPa. The 1/4" port and M12x1.25 male rod thread handle heavy flows, and the -S suffix enables CMSG, DMSG or EMSG sensors.
This stainless barrel and rod construction resists mild corrosion and washdown environments. Because it is a non-ISO-6432 size, it functions purely as a robust round-body mini cylinder rather than a standard interface unit. The cushion only decelerates the piston near the stroke end; it is not a mid-stroke lock or brake.
Airtac MICJ Adjustable Mini Cylinder MICJ40X200-50S Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ40X200-50S |
|---|---|
| Series | MICJ mini cylinder |
| Bore size | Ø40 mm |
| Stroke | 200 mm |
| Acting type | Double acting, double rod, adjustable stroke + cushion |
| Port size | 1/4" |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø40 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø40mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 528 N |
| 0.7 MPa | 739 N |
| Max (@1.0 MPa) | 108 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ40X200-50S
| MICJ | round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 40 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -50 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ40X200-50S Is Used
Heavy Clamping
Securely clamp heavy metal castings, using the 50 mm extend adjustment to dial in the exact forward stop without retooling the fixture.
Vertical Pressing
Apply a controlled downward force for component seating, relying on the 1/4" port and robust Ø16 rod to drive up to 32 kg safely.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ40X200-50S the Right Cylinder?
This model is ideal for fast, settable-position moves where the 50 mm extend adjuster lets you fine-tune the forward stop and the dual air cushions absorb end-of-stroke impact. Mount using LB foot, FA flange or TC trunnion brackets, as the SDB pivot-block is not available on this adjustable variant.
Remember that a plain cylinder does not hold its load on air loss or when the valve is centered, as the piston will drift. The stop screw sets the end position but acts as neither a mid-stroke lock nor a brake. If your application requires a held load, install an external rod lock or a pilot-operated check valve. The built-in magnet allows for precise position sensing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ40X200-50S FAQ
At 0.7 MPa, it pushes 879.6 N and pulls 738.9 N. The theoretical maximum force is 128.1 kgf at 1.0 MPa.
An external stop screw shortens the extend stroke by up to 50 mm on site, allowing a usable forward range of 150-200 mm, while the retract remains full. A needle-set variable air cushion at both ends decelerates the piston near the ends to soak up high-speed shock. The -S suffix provides a built-in magnet for CMSG, DMSG or EMSG sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ40X200-50S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.