Airtac MICJ Adjustable Mini Cylinder MICJ40X225-50S
The AirTAC MICJ Adjustable Mini Cylinder MICJ40X225-50S is a genuine double acting, double rod, adjustable stroke + cushion round-body mini air cylinder with a Ø40mm bore and 225mm stroke, 1/4" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ40 mm
- Stroke225 mm
- Port size1/4"
- Acting typeDouble acting, double rod, adjustable stroke + cushion
- Rod threadM12×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ40X225-50S
Dial in a precise 175 to 225 mm extend stop on-site with the AirTAC MICJ40X225-50S, a round-body stainless mini cylinder featuring a 50 mm external stroke adjuster. The built-in needle-set air cushions at both ends soak up high-speed shock, letting you set the exact forward position while controlling impact energy.
The stainless-steel barrel and 16 mm rod resist mild corrosion and washdown environments. Because this SKU includes the -S magnet, it is fully ready for CMSG, DMSG, or EMSG position switches. Note that Ø40 is a non-ISO-6432 size. The adjustable stop screw sets the end position but is not a mid-stroke lock; for holding a load on air loss, specify an external rod lock or pilot check valve.
Airtac MICJ Adjustable Mini Cylinder MICJ40X225-50S Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ40X225-50S |
|---|---|
| Series | MICJ mini cylinder |
| Bore size | Ø40 mm |
| Stroke | 225 mm |
| Acting type | Double acting, double rod, adjustable stroke + cushion |
| Port size | 1/4" |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø40 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø40mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 528 N |
| 0.7 MPa | 739 N |
| Max (@1.0 MPa) | 108 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ40X225-50S
| MICJ | round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 40 | Bore size in mm. |
| ×225 | Stroke length in mm. |
| -50 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ40X225-50S Is Used
Heavy Diverter Gate
Shifts a loaded diverting arm on a packaging line, using the 50 mm extend adjustment to fine-tune the gate angle without moving the bracketry.
Lowering Press Head
Lowers a 30 kg forming head at high speed; the dual adjustable air cushions absorb the impact, while the stop nut sets the exact crush depth.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ40X225-50S the Right Cylinder?
This 40 mm bore delivers substantial thrust, pushing 628.3 N and pulling 527.8 N at 0.5 MPa. The 50 mm extend adjustment window is ideal for fast set-position moves where you need to tune the forward stop without swapping hardware.
Mount this double-acting unit using LB foot, FA flange, or TC trunnion brackets (the SDB pivot-block is not available on adjustable-stroke variants). The air cushion only decelerates the piston near the stroke end and does not function as a brake. With the -S magnet equipped, you can mount CMSG, DMSG, or EMSG sensors directly for end-position confirmation.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ40X225-50S FAQ
This 40 mm bore double-acting cylinder uses a 1/4 inch port and a 16 mm rod. The theoretical maximum force is 128.1 kgf at 1.0 MPa.
An external screw shortens the extend stroke by up to 50 mm on-site, giving a usable forward range of 175 to 225 mm (retract remains full). Needle valves adjust the air cushions at both ends to decelerate the piston before impact. The -S suffix means it has a built-in magnet for CMSG, DMSG, or EMSG sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ40X225-50S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.